講演抄録/キーワード |
講演名 |
2014-11-18 10:25
非接触給電を応用した高圧インバータ向けゲート駆動用絶縁システムの動作検証 ○日下佳祐・加藤尚和・折川幸司・伊東淳一(長岡技科大)・森田一徳・近藤 猛(明電舎) WPT2014-51 |
抄録 |
(和) |
本論文では三相高圧インバータのゲート駆動回路へ電力を供給する絶縁システムを提案する.本システムは,プリント基板上に構成した伝送コイルを用いて伝送距離50 mmの電力伝送を行う.さらに,複数台非接触給電を応用することで1枚の送電側基板から6枚の受電側基板に同時に電力供給が可能である.これにより,従来のトランスを用いたシステムと比較して低コスト化が可能である.本論文では特に,提案システムの筐体が効率に与える影響について検討を行うため,アルミニウム製とアクリル製の二種類の筐体を作成し,効率の比較を行なった.その結果,筐体をアルミニウム製からアクリル製へ変えることで最高効率を29.4%から46.9%に改善できることを明らかにした.また,提案システムを三相インバータのゲート駆動用絶縁システムとして適用し,実際に三相インバータを駆動可能であることを実験により確認した. |
(英) |
An isolation system for gate drivers of a three-phase medium-voltage inverter is proposed in this paper. The power consumption in gate drivers are supplied beyond an air-gap of 50 mm from the one transmitting board to the six receiving boards using transmission coils on the printed circuit boards. It contributes a cost reduction of an isolation system. In this paper, the proposed system is experimentally demonstrated. In order to evaluate the effect of the materials of the chassis, especially, two types of the chassis made from aluminum and acrylic are tested. As a result, the maximum efficiency is improved from 29.4% to 46.9% by changing the materials from aluminum to acrylic.
Moreover, a three-phase inverter is operated with the proposed isolation system in order to clarify the utility of the system. |
キーワード |
(和) |
非接触給電 / 絶縁 / ゲート駆動回路 / 高圧インバータ / / / / |
(英) |
Wireless Power Transfer / Isolation / Gate Driver / Medium-voltage Inverter / / / / |
文献情報 |
信学技報, vol. 114, no. 310, WPT2014-51, pp. 7-12, 2014年11月. |
資料番号 |
WPT2014-51 |
発行日 |
2014-11-11 (WPT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
WPT2014-51 |