講演抄録/キーワード |
講演名 |
2014-11-19 15:20
一段方式非絶縁昇降圧形ZVS-PWM PFCコンバータの損失解析について ○相馬将太郎(リコー電子デバイス)・庄山正仁(九大)・山下友文(リコー) EE2014-27 |
抄録 |
(和) |
従来から、非絶縁形ZVS-PWM PFCコンバータはインダクタ電流連続モード(CCM)で動作する力率改善回路(PFC)の利点とソフトスイッチングの利点を兼ね備えた制御方法として知られている。また、一段方式PFCコンバータは出力電圧が脈動するが、例えばLED照明機器のように脈動が許容されるアプリケーションにおいては、部品点数が少なく、効率向上に有利である。しかしながら、一般に非絶縁形PFCコンバータは昇圧形であり、出力電圧を入力電圧のピーク電圧以下に設定することが出来ないため、高い出力電圧を有するアプリケーションを除いて一段方式で用いられることは無かった。本稿では非絶縁形ZVS-PWM PFCコンバータに昇降圧形コンバータのトポロジーを適用することで任意の入出力電圧に対応可能とした、一段方式非絶縁昇降圧形ZVS-PWM PFCコンバータを提案し、まずシミュレーション結果を用いて回路の特徴を述べる。また実験結果を用いて損失要因を明らかにする。 |
(英) |
Non-isolated ZVS(Zero Volt Switch)-PWM(Pulse Width Modulation) PFC(Power Factor Correction) converter is known as a PFC converter control method has the advantages of soft switching and the inductor current continuous conduction mode (CCM) . And the output voltage of the single stage PFC Converter is pulsating, but the single stage PFC has advantage of small number components, and of good efficiency. So it is used in applications where pulsating voltage is allowed, for example, as the LED lighting devices. However, non-isolated PFC uses boost topology in general, so it was never used except for the application having a high output voltage. In this paper, we propose a single stage non-isolated buck-boost ZVS-PWM PFC converter and describes the characteristics of the circuit. It can be used in any input and output voltage. Further, we clarify the architecture and the loss factor of the converter. |
キーワード |
(和) |
LED照明機器 / ZVS-PWM / 一段方式PFCコンバータ / 補助共振回路 / / / / |
(英) |
LED lighting devices / ZVS-PWM / Single stage PFC converter / Auxiliary resonant circuit / / / / |
文献情報 |
信学技報, vol. 114, no. 309, EE2014-27, pp. 49-54, 2014年11月. |
資料番号 |
EE2014-27 |
発行日 |
2014-11-11 (EE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EE2014-27 |