| 講演抄録/キーワード |
| 講演名 |
2014-12-19 16:25
光ファイバへの荷重印加によるスペックルパターンの変動に関する実験的検討 ○長谷川 誠・清水雄大・中丸卓也(千歳科技大) EMD2014-100 |
| 抄録 |
(和) |
半導体レーザ光が伝播しているジャケット付きで通信グレードの石英系マルチモード光ファイバに荷重を印加すると,光ファイバ出射光スポット内に観察されるスペックパターンに変動が生じる.15kgまでの荷重範囲では,荷重印加量の増加と共にパターンの分布範囲(出射光スポットの直径)が減少し,パターン内の粒状形状のカウント数が減少すること,逆に15kg印加状態から徐々に荷重を減らしていくとパターンの分布範囲(出射光スポットの直径)及びパターン内の粒状形状カウント数が初期値に向かって増加傾向を示すこと,さらに,これらの特性は比較的良好な再現性を示すことが確認された.また,出射光スポット全体を光電池パネルに照射した場合の出力電圧が,パターン内の粒状形状カウント数の変化と対応するように変化した. |
| (英) |
When a certain load is being applied onto an jacket-covered communication-grade multimode glass optical fiber through which laser beams form a laser diode as a light source is propagating, some changes can be recognized in speckle patterns to be observed in an output light spot from the fiber. In the load range up to 15kg, an area covered by distributed patterns (a diameter of the output light spot) is reduced with increasing the applied load, and the counted number of speckles in the pattern is also reduced. In contrast, with gradual decreases in the applied load level from 15kg, the area covered by distributed patterns (a diameter of the output light spot) as well as the counted number of speckles are likely to increase toward their original state. Relatively good repeatabilities can be found in such characteristics. In addition, when a photovoltaic panel was irradiated with the whole output light spot, its output voltage shows changes in accordance with changes in the counted number of speckles in the pattern. |
| キーワード |
(和) |
スペックルパターン / 光ファイバ / 荷重 / センシング / / / / |
| (英) |
speckle pattern / optical fiber / load / sensing / / / / |
| 文献情報 |
信学技報, vol. 114, no. 382, EMD2014-100, pp. 31-36, 2014年12月. |
| 資料番号 |
EMD2014-100 |
| 発行日 |
2014-12-12 (EMD) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMD2014-100 |