講演抄録/キーワード |
講演名 |
2015-04-28 15:00
電力変換回路の伝導妨害波予測を目的とした線形等価回路モデルの検討 ~ スイッチング周波数変動影響の考察 ~ ○下司弘樹・五百旗頭健吾(岡山大)・渡辺哲史(岡山県工技センター)・豊田啓孝(岡山大) EMCJ2015-5 |
抄録 |
(和) |
電力変換回路における効率的な伝導妨害波低減設計実現を目的として,設計段階で伝導妨害波を予測する線形等価回路モデルを開発している.
これまでに, IH調理器の伝導妨害波の大きさを概ね予測できたが,同定したモデル定数のうちインピーダンスが,線形回路素子の組み合わせでは表せない特性を示した.
本稿では,可能性のあるその原因の1つとして, IGBTのスイッチング周波数の変動について検証した.
モデルパラメータ同定のための伝導妨害波測定法を改良し,一定のスイッチング周波数のデータを取得可能とした.
改良した測定法を用いて,測定を行い,モデルの同定を行った.
モデル定数同定結果より, IGBTのスイッチング周波数変動による測定誤差がモデル定数に与える影響は小さいことを示した. |
(英) |
For the purpose of efficient conducted disturbance reduction design in power conversion circuit, we have developed a linear equivalent circuit model to predict the conducted disturbance at the design stage.
So far, we predicted the magnitude of the conducted disturbance of an induction heater.
However, the impedance of the model parameter did not show the characteristic of a combination of the linear circuit elements, ${sl R}$, ${sl L}$, ${sl C}$.
In this paper, we examined the variation of the switching frequency of the IGBT as one of the causes.
We improved the measurement for model identification measurement.
By using the improved measurement method, we identified model parameters and compared with previous ones.
As a result, the switching frequency variation of the IGBT is shown that effect on the model identification. |
キーワード |
(和) |
伝導妨害波電圧 / モデル定数 / / / / / / |
(英) |
Conducted Disturbance / Model Parameter / / / / / / |
文献情報 |
信学技報, vol. 115, no. 17, EMCJ2015-5, pp. 19-24, 2015年4月. |
資料番号 |
EMCJ2015-5 |
発行日 |
2015-04-21 (EMCJ) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2015-5 |
|