講演抄録/キーワード |
講演名 |
2015-05-21 14:25
耐リフロー性を有する樹脂レンズの10G伝送特性:射出成形により構成された耐熱樹脂レンズ ○島津貴之・春本道子・佐野知巳(住友電工)・渡邊卓郎(日本通信電材)・岡部昭平・片山浩二(住友電工ファインポリマー)・山崎 智・西川信也(住友電工) OFT2015-4 |
抄録 |
(和) |
汎用の射出成形により形成された光学樹脂レンズは、生産性やコストメリットに利点を有しており、多くの光学製品に広く使用されている。しかし、耐熱温度が低く、半田リフローなどの高温環境下にさらすことができない。結果的に、この樹脂レンズを実装した光学ユニットを、マザーボードへリフロー実装するといった手法が採れないため、設計自由度に制約を与えている。本報告は、電子線照射・架橋技術を用い、射出成形で形成されたものでありながら、耐熱性を有する光学樹脂レンズの開発を行い、実際にリフローへ投入した場合の形状特性や10-Gbit/s伝送特性を評価したものである。開発したレンズは、良好な特性を示していることを確認した。 |
(英) |
The thermoplastic optical lens that made by conventional injection molding method is productivity and cost effective but having poor heat resistance. Thermoplastic optical lens module will melt and be deformed at such high temperature. Therefore, the reflow process cannot be applied to thermoplastic optical lens module. As a consequence, optical units using thermoplastic optical lens module cannot be mounted on the mother board by the reflow process. We successfully developed reflowable thermoplastic optical lens that the process with electron beam irradiation cross-linking and it enables 10-Gbit/s optical transmission. We confirmed it having high possibility of design flexibility for high density optical applications. |
キーワード |
(和) |
熱可塑性樹脂 / 射出成形 / 光学レンズ / 電子線照射 / リフロー / / / |
(英) |
Thermoplastic Resin / Injection Molding / Optical Lens / Electron Beam irradiation / Reflow / / / |
文献情報 |
信学技報, vol. 115, no. 44, OFT2015-4, pp. 17-20, 2015年5月. |
資料番号 |
OFT2015-4 |
発行日 |
2015-05-14 (OFT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2015-4 |