講演抄録/キーワード |
講演名 |
2015-09-17 10:30
1波CW信号を用いた3次PIMの推定法 ○河合邦浩・福田敦史・高儀雄太・岡崎浩司・楢橋祥一(NTTドコモ) MW2015-87 エレソ技報アーカイブへのリンク:MW2015-87 |
抄録 |
(和) |
複数のキャリア周波数の信号を1つのアンテナから端末へと送信する,基地局装置のマルチバンド化が検討されている.これに伴い,受動素子で発生する相互変調ひずみ(Passive Intermodulation Distortion: PIM)による受信感度劣化が懸念され, PIM測定の簡略化が望まれている. 筆者らは,これまでLTE変調信号3波入力時に発生するPIM電力をCW信号3波入力時の測定結果を用いて推定することを提案した. 本報告では,更なる簡略化のため,1波CW信号を被測定物に入力した際に生ずる3次高調波の電力から,3波CW信号を入力した際の3次のPIM電力を推定する方法を示す. さらに,基地局で用いられる受動素子である同軸ケーブルにおけるPIMにつき, 3波CW信号を用いたときの3次のPIM電力と1波CW信号入力時の3次高調波電力を比較し,提案方法の妥当性を示す. |
(英) |
This paper presents an estimation method for a third order passive intermodulation distortion (PIM) using one continuous wave signal (CW) in order to simplify the measurement system of the PIM. In the estimation method, the PIM is calculated from the third order harmonics that is an output signal of the device under test (DUT) when the CW at a fundamental frequency is input to the DUT. This paper also introduces a measurement system for the method and a circuit to eliminate the signal at the fundamental frequency and to pick up the third order harmonics. The validity of the method is discussed through the measurement results of passive components, co-axial cables. |
キーワード |
(和) |
PIM / マルチバンド / 同軸ケーブル / / / / / |
(英) |
PIM / Multi-band operation / Co-axial cables / / / / / |
文献情報 |
信学技報, vol. 115, no. 227, MW2015-87, pp. 1-8, 2015年9月. |
資料番号 |
MW2015-87 |
発行日 |
2015-09-10 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2015-87 エレソ技報アーカイブへのリンク:MW2015-87 |