講演抄録/キーワード |
講演名 |
2016-01-22 13:35
平板状4ターンコイルによるAl/Cu薄板の電磁圧接シーム溶接 ○相沢友勝(都立高専) EMD2015-87 エレソ技報アーカイブへのリンク:EMD2015-87 |
抄録 |
(和) |
アルミ(Al)薄板上に間隙を設けて銅(Cu)薄板を重ね,これらを絶縁された平板状4ターンコイル上に固定する.コンデンサ電源からこのコイルへ放電大電流を急激に流す.Al薄板には,磁束が交差し,渦電流が流れ,電磁力が働く.この力でAl薄板はCu薄板へ高速衝突し,両薄板(Al/Cu)は圧接される.この電磁圧接は,電源エネルギー0.5kJ未満,放電電流最大値40kA未満で行われる.原理,方法及び実験結果を報告する. |
(英) |
This paper describes a novel welding technique of an Al sheet to a Cu sheet and its experimental results. When a discharge current from a capacitor bank passes through a flat four-turn coil, a magnetic flux is suddenly generated around the coil. Eddy currents are induced in the overlapped Al sheet and Cu sheet placed on the coil. The Al/Cu sheets have a gap between them. Electromagnetic force acts on the Al sheet near the coil and lets the Al sheet collide and weld to the Cu sheet. The bank energy required for this welding is less than 0.5kJ and the peak discharge current is less than 40kA. |
キーワード |
(和) |
Al/Cu接合 / 溶接 / 電磁圧接 / シーム溶接 / Al/Cu薄板 / 積層式リチウムイオン電池 / / |
(英) |
Al/Cu joining / Welding / Magnetic pulse welding / Seam welding / Al/Cu sheets / Laminated Li-ion battery / / |
文献情報 |
信学技報, vol. 115, no. 416, EMD2015-87, pp. 1-6, 2016年1月. |
資料番号 |
EMD2015-87 |
発行日 |
2016-01-15 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2015-87 エレソ技報アーカイブへのリンク:EMD2015-87 |