講演抄録/キーワード |
講演名 |
2016-02-19 13:45
交流インピーダンス法による電気接点に介在するコンタクトオイルの状態評価 ○寺岡史貴・飯田和生(三重大)・澤田 滋・清水 敦(オートネットワーク技研) R2015-66 EMD2015-94 エレソ技報アーカイブへのリンク:EMD2015-94 |
抄録 |
(和) |
近年、自動車用コネクタの挿入力の低減が課題となっており、その解決策のひとつとしてコンタクトオイルの適用が考えられている。本研究では、鋼球と液体金属を用いた接点での交流インピーダンス法により、コンタクトオイルの抵抗、キャパシタンス、油膜厚及び油膜破断率を算出することで油膜の状態評価を行った。その結果、粘度が増加するにつれ膜厚は増加し、破断しづらくなることが判明し、また混合オイルは単体オイルに比べ油膜厚が薄く、破断率が低いということが判明した。 |
(英) |
Recently, there is a need for decrease of insertion force for automobile connector, and applying of the contact oil is considered as one of the solutions. In this study, characterization of the oil film was evaluated by calculating a resistance, capacitance, oil film thickness and oil film breakage rate of the contact oil by the alternating current impedance method using the steel ball and the liquid metal. As a result, it is proved that the oil film thicknesses and oil film breakage rate increased as oil viscosity increased. The oil film thickness of the mixed oil was thinner than that of simple substance oil, and a breakage rate also was lower. |
キーワード |
(和) |
コネクタ / コンタクトオイル / 交流インピーダンス測定 / 油膜厚 / 破断率 / / / |
(英) |
Connector / Contact oil / Alternating current impedance measurement / Oil film thickness / Oil breakage rate / / / |
文献情報 |
信学技報, vol. 115, no. 455, EMD2015-94, pp. 7-12, 2016年2月. |
資料番号 |
EMD2015-94 |
発行日 |
2016-02-12 (R, EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
R2015-66 EMD2015-94 エレソ技報アーカイブへのリンク:EMD2015-94 |
|