講演抄録/キーワード |
講演名 |
2016-03-04 09:00
ミリ波帯デカップリング用低特性インピーダンス伝送線路の評価 ○合田龍平・高野恭弥・片山光亮・天川修平・吉田 毅・藤島 実(広島大) MW2015-202 ICD2015-125 エレソ技報アーカイブへのリンク:MW2015-202 ICD2015-125 |
抄録 |
(和) |
ミリ波帯の広帯域デカップリングは非常に特性インピーダンスが低い伝送線路(0-Ω伝送線路)を用いることで実現される.しかし,特性評価が難しいため,モデルがなく回路シミュレーションに特性が考慮されていない.0-Ω伝送線路は通常の2ポートスルー測定とは異なる構成で測定されるため,測定結果はスタブの入力インピーダンスだけである.そのため,モデリングするために入力インピーダンスから特性インピーダンスや伝搬定数やスタブの終端のインピーダンスを推定する必要がある.そこで,伝送線路理論と矛盾が生じないような特性インピーダンス,伝搬定数,終端のインピーダンスを数値探索を用いて評価する.この推定値を用いてモデリングを行うことで,どの長さにも対応したモデルを実現した. |
(英) |
Wideband decoupling for millimeter-wave is possible with the transmission line with extremely low characteristic impedance (0-Ω transmission line). The 0-Ω transmission line model has not yet been incorporated in circuit simulation, because it is very difficult to characterize. Since the 0-Ω transmission line is measured in a different measurement configuration to the ordinary two-port measurement, the measurement result is only the input impedance of the stubs. To construct the model, the characteristic impedance, the propagation constant and the impedance of the far end of the transmission line have to be extracted from the measured input impedance. In this paper, we evaluate the characteristic impedance, the propagation constant and the impedance of the far end of the transmission line by using the numerical search. The scalable model is built from this estimate. |
キーワード |
(和) |
ミリ波 / デカップリング / モデリング / 伝送線路 / / / / |
(英) |
Millimeter-Wave / Decoupling / Modeling / Transmission Line / / / / |
文献情報 |
信学技報, vol. 115, no. 476, MW2015-202, pp. 163-167, 2016年3月. |
資料番号 |
MW2015-202 |
発行日 |
2016-02-24 (MW, ICD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2015-202 ICD2015-125 エレソ技報アーカイブへのリンク:MW2015-202 ICD2015-125 |