| 講演抄録/キーワード |
| 講演名 |
2016-05-13 11:30
放射電力を考慮したマイクロストリップ線路とグラウンドスロットのクロストーク解析 ○戸花照雄・笹森崇行・礒田陽次(秋田県立大) EMCJ2016-10 |
| 抄録 |
(和) |
近年,プリント基板上に線路や素子を高密度で実装するために,
基板の多層化が進みグラウンドのビアホールや切れ込みなどにより
形成されるスロットの影響が懸念されている.
本報告では両面基板の片面にマイクロストリップ線路が存在し,
もう一方の面にグラウンドがあり
そこに幅の狭いスロットがマイクロストリップ線路に平行に
近接して置かれた場合の線路間の電磁結合を多導体伝送線路理論を用いて解析する.
ここで,スロットを介して起こる電磁結合を計算するために
必要となる単位長さ当たりパラメータを
スペクトル領域法を用いて計算し,スロットによる放射損失を考慮した.
解析結果より,スロットによる放射損失はほとんど影響しないことが
分かった. |
| (英) |
Recently, by advance of miniaturization of electronic devices,
a ground of a printed circuit board is tend to be small and complicated
and the ground may have some defects,
such as connectors or clearance halls of vias.
In this paper,
we calculated electromagnetic coupling between a microstrip line and
a ground slot on a printed circuit board
using multi-conductor transmission lines method.
In order to calculate some electromagnetic coupling,
per-unit-length parameters between the slot and the microstrip line
are calculated using the spectral domain method
and applied the radiation loss by the slot.
In this paper, we showed that
the radiation loss did not affect to the calculation results. |
| キーワード |
(和) |
電磁結合 / 多線条伝送線路理論 / グラウンドスロット / 放射電力 / / / / |
| (英) |
coupling / multiconductor-transmission-line / ground slot / radiation power / / / / |
| 文献情報 |
信学技報, vol. 116, no. 26, EMCJ2016-10, pp. 7-10, 2016年5月. |
| 資料番号 |
EMCJ2016-10 |
| 発行日 |
2016-05-06 (EMCJ) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMCJ2016-10 |