講演抄録/キーワード |
講演名 |
2016-05-20 14:05
石膏材による3Dプリンター造形物への情報埋め込みと読み出し技術 ○中村耕介・鈴木雅洋(神奈川工科大)・高嶋洋一(NTT)・鳥井秀幸・上平員丈(神奈川工科大) IT2016-16 EMM2016-16 |
抄録 |
(和) |
筆者らが提案した3Dプリンター用デジタルデータの著作権保護技術について,石膏材による3Dプリンター造形物にも適用できるか検討した.この技術では,デジタルデータに埋め込んだ著作権情報を3Dプリンター造形物にも埋め込み,非破壊検査で造形物から著作権情報を読み出して,著作権保護を可能とする.これまでの検討では,プラスチック製造形物の内部を空洞で構造化して埋め込んだ著作権情報を非破壊に読み出せることを実証した.本研究では,提案技術が石膏製造形物に適用できるか検討した.情報は,石膏粉末を固化せずに粉末のまま残した微小領域で石膏製造形物の内部を構造化して埋め込んだ.また,情報の読み出しにはサーモグラフィーを用いた.実験の結果は,情報を読み出せることを示した.提案技術が石膏製造形物内部に適用できることを実証した. |
(英) |
We evaluated our previously proposed technique for protecting copyrights of digital data for 3-D printing. The proposed technique embedded copyright information into not only digital data but also fabricated objects and read it out from the objects to confirm illegal acts such as bootleg products. In our previous studies, we demonstrated that we could nondestructively read information embedded into plastic objects by constructing their inside with small cavities. In this study, we examined whether the proposed technique could be applied to gypsum objects. Information was embedded into gypsum objects by constructing their inside with small areas that were not solidified and were filled with gypsum powder. Thermography was used for nondestructive readout. The results obtained from the experiment indicated that the embedded information could be read. We demonstrated that the proposed technique could be applied to gypsum objects. |
キーワード |
(和) |
デジタルファブリケーション / 三次元印刷 / 3Dプリンター / 著作権 / / / / |
(英) |
Digital Fabrication / 3-D Printing / 3-D Printer / Copyright / / / / |
文献情報 |
信学技報, vol. 116, no. 34, EMM2016-16, pp. 93-97, 2016年5月. |
資料番号 |
EMM2016-16 |
発行日 |
2016-05-12 (IT, EMM) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
IT2016-16 EMM2016-16 |
|