| 講演抄録/キーワード |
| 講演名 |
2016-07-08 13:25
エピタキシャルFePt薄膜における格子歪と規則化の関係 ○中村将大・落合亮真(中大)・大竹 充(工学院大/中大)・二本正昭(中大)・桐野文良(東京藝術大)・稲葉信幸(山形大) MR2016-14 |
| 抄録 |
(和) |
L10構造を持つFePt合金膜を磁気記録媒体などに応用するためには,磁化容易軸であるc軸を膜面垂直方向に制御する必要がある.しかしながら,(001)配向した基板や下地層上に形成した場合,c軸が面直に向いたL10(001)結晶に加え,面内を向いたL10(100)や(010)結晶が膜中に混在する可能性が考えられる.c軸を面直方向に制御するためには,FePt膜よりも大きな格子定数を持つ基板上に形成し,膜と基板との格子不整合によって面内方向に引張応力を加えることが有効であると考えられる.本研究では,格子定数の異なる単結晶基板上に10 nm厚のFePt膜を形成し,格子不整合がFePt膜の構造に与える影響について調べた.また,基板だけでなくキャップ層を用いることにより,効果的にc軸を制御が出来ないか検討した.その結果,キャップ層が無い場合,基板と膜でおよそ10%の格子不整合を与えた場合においても,c軸を面直のみに制御することは出来なかったが,キャップ層を用いることで制御可能になり,規則度も向上した. |
| (英) |
In order to apply FePt alloy thin film with L10 structure to magnetic recording media, etc., it is required to control the easy magnetization axis (c-axis) perpendicular to the surface. However, when a film with L10 structure is formed on a (001)-oriented underlayer or substrate, L10(100) and L10(010) variants whose c-axis lies in the film plane may coexist with the L10(001) variant with the c-axis perpendicular to the substrate surface. In order to control the c-axis perpendicular to the surface, it is effective to introduce tensile stress in lateral direction caused by lattice mismatch with the substrate. In the present study, FePt films of 10 nm thickness are prepared on various (001) oxide substrates with different lattice constants. The influences of lattice strain caused by lattice mismatch on the variant orientation and the order degree are investigated. In addition, the effects of cap-layer formed on FePt film are also studied. The results indicate that a larger lattice mismatch is effective in enhancing the growth and ordering of L10(001) variant, and the presence of cap-layer is useful in further promoting the tendency. |
| キーワード |
(和) |
FePt / 薄膜 / L10規則構造 / 格子不整合 / 結晶配向 / エピタキシャル成長 / 単結晶基板 / |
| (英) |
FePt / thin film / L10 ordered structure / lattice strain / crystallographic orientation / epitaxial growth / single-crystal substrate / |
| 文献情報 |
信学技報, vol. 116, 2016年7月. |
| 資料番号 |
|
| 発行日 |
2016-07-01 (MR) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MR2016-14 |