講演抄録/キーワード |
講演名 |
2017-03-06 14:30
[ポスター講演]3Dプリンター造形物への情報埋め込みと近赤外線反射像による読み出し技術 ○中村耕介・鈴木雅洋・高沢渓吾(神奈川工科大)・高嶋洋一(NTT)・鳥井秀幸・上平員丈(神奈川工科大) EMM2016-88 |
抄録 |
(和) |
3D プリンター造形物に不可視に情報を埋め込み,近赤外線反射像を用いて,埋め込まれた情報を造形物から非破壊に読み出す技術を評価した.提案技術では,最初に3D プリンター用デジタルデータに情報を埋め込む.次に,そのデータと3Dプリンターとを用いて造形物を造形するときに,造形物内部に情報を埋め込む.造形物内部の情報は,本体とは物理的な特性が異なる微小領域を用いて内部を構造化することによって表現される.非破壊検査の手法を応用して造形物内部の微小領域構造を検出して,検出した構造から埋め込まれた情報を復号する.評価実験では,近赤外線透過率が高い青色の樹脂を用いて造形物本体を造形した.造形物内部の微小領域は,近赤外線反射率が高い白色の樹脂を用いて造形した.造形物内部の微小領域構造の検出には,近赤外線反射像を用いた.実験の結果,近赤外線反射像から造形物内部の微小領域構造を目視によって確認することができた.提案技術の実現可能性を実証した. |
(英) |
We evaluated our previously proposed technique of invisibly embedding information inside a 3-D printed object and of nondestructively reading the embedding information from the object by using near-infrared reflected imaging. In this technique, information is first embedded in the digital data for 3-D printing. Then, the information is also embedded inside a 3-D printed object when the object is fabricated with the data and a 3-D printer. The information inside the object is expressed by constructing the inside with fine domains different in physical characteristics from the main body. The structure of the fine domains inside the object is detected by utilizing nondestructive inspection, and the information is decoded from the detected structure. In the experiment, the main body was fabricated from blue resin that had high transmittance of the near-infrared rays. The fine domains were fabricated from white resin that had high reflectance of the near-infrared rays. Near-infrared reflected imaging was used to detect the structure of the fine domains inside the object. The results obtained from the experiment indicated that the structure of the fine domains inside the object could be detected by eyesight. We demonstrated the feasibility of the technique. |
キーワード |
(和) |
3Dプリンター / 三次元印刷 / デジタルファブリケーション / 付加製造 / / / / |
(英) |
3-D Printers / 3-D Printing / Digital Fabrication / Additive Manufacturing / / / / |
文献情報 |
信学技報, vol. 116, no. 501, EMM2016-88, pp. 13-17, 2017年3月. |
資料番号 |
EMM2016-88 |
発行日 |
2017-02-27 (EMM) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMM2016-88 |