講演抄録/キーワード |
講演名 |
2017-08-25 12:55
幅広面結合型スプリットリング共振器を放射素子としたアンテナの小型化 ○佐野 誠・山田啓壽・桧垣 誠(東芝) AP2017-84 |
抄録 |
(和) |
無線通信機器の小型化に伴い,回路基板上に形成可能な小型アンテナが求められている.これまでに,著者らは回路基板上に形成可能な小型アンテナとして,メタマテリアルの構成要素の一種である幅広面結合型スプリットリング共振器(BC-SRR)を放射素子としたアンテナを報告した.今回,両面基板上に形成した1.5 mm×10 mmの長方形状のBC-SRRにL字状のノッチを追加することで,アンテナの面積を大きくすることなく共振周波数を2.52 GHzから2.00 GHzに低周波化できることを確認したので報告する.共振周波数2.00 GHzにおけるBC-SRRの外形寸法は,波長の1.00%×6.67%と小さい.また,BC-SRRアンテナの共振周波数は基板の大きさには依存しないこと,4層基板にBC-SRRを形成することでアンテナをさらに小型化できることを示す. |
(英) |
Because of miniaturization of wireless devices, small antennas which can be printed on a circuit board are demanded. In our previous study, we proposed an electrically small antenna using one of metamaterial components, broadside-coupled split ring resonator (BC-SRR), as a radiating element. In this report, we present that the resonant frequency of a 1.5 mm×10 mm-BC-SRR antenna on a 2-layer substrate is lowered from 2.52 GHz to 2.00 GHz by adding L-shaped notches to the BC-SRR, without increasing the size of the BC-SRR. At the resonant frequency of 2.00 GHz, the proposed BC-SRR is as small as 1.00%×6.67% in terms of the wavelength. It is also presented that the resonant frequency of the proposed BC-SRR antenna is not dependent on the substrate size, and the resonant frequency is further lowered by forming BC-SRR on a 4-layer substrate. |
キーワード |
(和) |
スプリットリング共振器 / 小型アンテナ / メタマテリアル / / / / / |
(英) |
Split ring resonator / Electrically small antenna / Metamaterial / / / / / |
文献情報 |
信学技報, vol. 117, no. 181, AP2017-84, pp. 87-92, 2017年8月. |
資料番号 |
AP2017-84 |
発行日 |
2017-08-17 (AP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2017-84 |
|