講演抄録/キーワード |
講演名 |
2017-11-06 15:35
近赤外蛍光樹脂による3Dプリンター造形物内への情報埋め込み 松本知久・中村耕介・鳥井秀幸(神奈川工科大)・鈴木雅洋(常磐大)・高嶋洋一(NTT)・○上平員丈(神奈川工科大) EMM2017-57 |
抄録 |
(和) |
3Dプリンターを用いて樹脂材で物体を造形する際,造形物内部を構造化してパタンを形成することにより,造形物内部に情報を埋め込む方法について研究を進めている.埋め込まれた情報は外部から非破壊で読み出すが,本報告では読み出し精度を高めるため内部パタンを近赤外蛍光樹脂で形成する方法を検討した.この方法では,特定波長の近赤外励起光を造形物に照射して蛍光樹脂で形成された内部パタンを発光させたとき,この発光光が励起光と波長が異なることを利用して発光光のみ光学フィルタで選択的に取り出して内部パタンの像のみ撮影できるので精度の高い情報読み出しが期待できる.二つのノズルをもつ熱溶解式3Dプリンターを用い,ABS樹脂により一方のノズルで造形物本体を形成し,もう一方のノズルでは蛍光色素を含有させたABS樹脂で内部パタンを形成した.近赤外線カメラで撮影した画像から鮮明な内部パタンが撮像できることがわかり本方法の有効性を実証した. |
(英) |
We have been studying a method of embedding information inside an object fabricated with a resin material using a 3D printer by forming pattern inside the object that expresses information. In this report, we report the new method of forming an internal pattern with a near infrared fluorescent resin material in order to improve the accuracy of reading embedded information. In this method, when an object is irradiated with near-infrared light of a specific wavelength that excites the fluorescent resin material, the fluorescent resin emits light at a wavelength different from that of the excitation light. Therefore, if only the light emitted by the fluorescent material is used for capturing near infrared image by using the optical filter, only the image of the pattern embedded in the object can be captured, and information reading with high accuracy can be expected. Using a fused deposition-modeling 3D printer with two nozzles, the main body of an abject was formed with one nozzle using ABS resin, and the other nozzle formed an internal pattern with ABS resin containing fluorescent dye. We confirmed that clear images of internal patterns could be captured and the effectiveness of this method was demonstrated. |
キーワード |
(和) |
3Dプリンター / 情報ハイディング / 近赤外線 / 蛍光物質 / / / / |
(英) |
3-D Printer / Information Hiding / Near-Infrared Ray / Fluorescent Material / / / / |
文献情報 |
信学技報, vol. 117, no. 282, EMM2017-57, pp. 13-16, 2017年11月. |
資料番号 |
EMM2017-57 |
発行日 |
2017-10-30 (EMM) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMM2017-57 |