講演抄録/キーワード |
講演名 |
2017-11-17 13:30
血管内超音波検査用コイル状ステータ超音波モータの音響導波路材に関する検討 ○上原長佑・栗田恵亮・大関誠也・竹内真一(桐蔭横浜大) US2017-69 |
抄録 |
(和) |
我々は,血管内超音波検査(IVUS)への応用を目的として,駆動源をカテーテルの先端に設置可能な小型モータである,コイル状ステータ超音波モータ(CS-USM)の開発行ってきた.先行研究で開発されたΠ型構造を有する超音波パワー循環型音響導波路構造のCS-USM では駆動効率が0.8%と低く,高効率化が求められる.本研究では,音響導波路材料にステンレス(SUS304),チタン,銅を用いて単一振動子CS-USM の作製を行った.作製した単一振動子型CS-USMを用いて回転速度測定と振動分布測定を行った.回転速度測定ではIVUSに必要な回転数である1800 rpm 以上を記録した.振動分布測定では駆動周波数と波長から厚み伝搬速度を求めた. |
(英) |
The CS-USM with ultrasonic power circulation type structure using Π-shaped acoustic waveguide was developed in the previous research. However, the driving efficiency is as low as 0.8% and efficiency improvement is required. In this study, single transducer type CS-USM was fabricated using stainless steel (SUS 304), titanium, and copper for the acoustic waveguide material. Revolution speed measurement and vibration distribution measurement were carried out using the fabricated single transducer type CS-USM. In the revolution speed measurement, we could observe the revolution speed higher than 1800 rpm which is the required for the IVUS systems. In the vibration distribution measurement, the propagation velocity of the elastic wave with thickness direction displacement was obtained from the driving frequency and the measured wavelength |
キーワード |
(和) |
コイル状ステータ / CS-USM / 超音波モータ / 回転速度 / 振動分布 / / / |
(英) |
Coiled stator / CS-USM / Ultrasound motor / Revolution speed / Vibration distribution / / / |
文献情報 |
信学技報, vol. 117, no. 311, US2017-69, pp. 25-29, 2017年11月. |
資料番号 |
US2017-69 |
発行日 |
2017-11-10 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2017-69 |