講演抄録/キーワード |
講演名 |
2018-01-19 10:20
ファイバヒューズ伝搬によって生じるコアの溶融領域に関する検討 ○辻川恭三(NTT)・黒河賢二(北見工大)・半澤信智(NTT東日本)・野添紗希・松井 隆・中島和秀(NTT) OFT2017-65 |
抄録 |
(和) |
高パワー入力条件下で確率論的に発生するファイバヒューズ現象は、シングルモードファイバによる波長多重伝送(WDM)の容量制限要因の一つである。このファイバヒューズへの対応策の一つとして、空孔構造を用いたHAF(空孔アシストファイバ)の使用が挙げられる。これは、適切な空孔配置を持つ空孔型光ファイバではファイバヒューズの伝搬パワーの閾値が飛躍的に改善されるためである。その際の空孔構造設計の鍵となるのが、ファイバヒューズ伝搬時に生じるコア近傍の溶融領域の直径(Dmelted)であり、Dmeltedの予測が可能になれば、空孔構造の設計の指針として有益である。本検討では、汎用のSMF(1.3帯ゼロ分散ファイバ)とDSF(分散シフトファイバ)を含め、モードフィール直径(MFD)の異なる3種のシングルモード光ファイバを用いて、 Dmeltedとファイバヒューズの伝搬速度vと入力光パワーPとの関係を評価し、MFDの値に関わりなくv、Dmelted、Pとの間に一定の関係式が成り立つことを見出した。さらにこの関係を用いたDmeltedの推定方法を提案した。 |
(英) |
A fiber fuse is a phenomenon resulting in the catastrophic destruction of the optical fiber. In the near future the fiber fuse phenomenon will pose a real danger to WDM based optical communication systems. Hole-assisted fiber (HAF) is one of the promising candidates for avoiding the damage caused by a fiber fuse since the Pth in HAF can be much higher than that in conventional SMF. For designing a HAF with high Pth value, the diameter of the melted area after fiber fuse propagation (Dmelted) is a key parameter. We investigated the fiber fuse characteristics of SMFs and DSF. We found a specific relationship between the propagation velocity, the input power and Dmelted. Based on the relationship, we proposed the method for predicting the value of Dmelted of single-mode fibers with different mode-field diameter. |
キーワード |
(和) |
ファイバヒューズ / モードフィールド直径 / 高パワー / 溶融領域 / / / / |
(英) |
fiber fuse / mode field diameter / high power / melted area / / / / |
文献情報 |
信学技報, vol. 117, no. 387, OFT2017-65, pp. 43-46, 2018年1月. |
資料番号 |
OFT2017-65 |
発行日 |
2018-01-11 (OFT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2017-65 |