講演抄録/キーワード |
講演名 |
2018-03-01 14:25
[特別講演]プリント基板加工機によるVスロットDGSを用いた小型BRFの試作方法 ○中村流星・小野 哲・和田光司(電通大) MW2017-181 ICD2017-105 エレソ技報アーカイブへのリンク:MW2017-181 ICD2017-105 |
抄録 |
(和) |
本研究では,マイクロストリップライン構造におけるグランド面を意図的に切削することによってストリップ導体にインダクタンスやキャパシタンスを実現するDGS(Defected Ground Structure)を用いて,Band-rejction filter(BRF)を実現する.
はじめに,2017年度学生マイクロ波回路設計試作コンテストの設計・試作条件について説明し,様々なタイプのBRFの先行研究と,自ら定めた設計目標について説明する.
次に,DGSの先行研究と原理について説明し,VスロットDGSの問題点について述べる.
さらに,実際に基板加工機を用いた試作実験の方法と工夫点について述べる.
最後に,提案するVスロットDGSを用いた小型BRFの評価を行う. |
(英) |
In this study, Band-rejection filter (BRF) is realized by using DGS (Defected Ground Structure) which realizes inductance and capacitance in strip conductors by intentionally cutting ground plane in microstrip line structure.
Firstly, we explain the design and prototyping conditions of the Microwave Circuit Design Universiade 2017, and the previous researches of various types of BRF and the design goals that we decided.
Secondly, we also explain the previous researches and principle of DGS and describe the problem of V slot DGS.
In addition, we describe the fabrication methodology and the important points of trial experiment which actually carried out using the printed circuit board(PCB) prototyping machine.
Finally, we evaluate the compact BRF using the proposed V slot DGS. |
キーワード |
(和) |
バンドリジェクションフィルタ / グランド欠陥構造 / 基板加工機 / 2017年度学生マイクロ波回路設計試作コンテスト / / / / |
(英) |
Band-rejection filter / Defected Ground Structure / Printed circuit board(PCB) prototyping machine / Microwave Circuit Design Universiade 2017 / / / / |
文献情報 |
信学技報, vol. 117, no. 462, MW2017-181, pp. 39-44, 2018年3月. |
資料番号 |
MW2017-181 |
発行日 |
2018-02-22 (MW, ICD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2017-181 ICD2017-105 エレソ技報アーカイブへのリンク:MW2017-181 ICD2017-105 |