| 講演抄録/キーワード |
| 講演名 |
2018-05-19 13:50
膝関節部MR脛骨モデルを用いた脛骨座標系の推定 ○森田友眞・林 豊彦(新潟大)・渡邉 聡(新潟医療センター) MBE2018-3 |
| 抄録 |
(和) |
膝関節は疾患が発生しやすい部位のひとつであり,その病態や原因の把握のために,3次元骨モデルを用いた膝関節の運動解析が行われてきた.膝運動は,大腿骨と脛骨に構築した座標系間の並進・回転によって表現される.従来,CT骨モデルが用いられてきたが,低侵襲性や軟部組織モデルの付与の利点から,近年ではMR骨モデルも用いられている.しかし,MRモデルは膝部分のみであるため,従来の脛骨座標系が構築できないという問題がある.そこで本研究では,脛骨MRモデル上で設定できる近似的な脛骨座標系を提案した.その座標系を用いて並進・回転成分を算出した結果,それぞれのRMS誤差は最大で2.73[mm],2.35[deg]であった.近似された脛骨座標系は従来の脛骨座標系に比較的近かったが,臨床応用するためには,関節面の傾斜などの形状情報を用いた改善が必要である. |
| (英) |
Since the knee joint is known to be one of the most vulnerable parts in the human body, its 3D bone model-based motion analysis has been done in order to understand pathology and causes of knee diseases. Knee motion is usually described as translation and rotation between the coordinate systems constructed on the femur and the tibia. A 3D bone model has been reconstructed from CT images up to now, but recently it’s also reconstructed from MR images due to the advantages of non-invasiveness and soft-tissue model inclusion. However, the conventional tibial coordinate system cannot be applied to this model, because the MR model is usually reconstructed merely around the knee joint. Then, we proposed an approximate tibial coordinate system which can be reconstructed on tibial MR model. As a result of calculating translation/rotation components using the proposed coordinate system, the maximum RMS error was 2.73 [mm] and 2.35 [deg], respectively. Thus, the approximated tibial coordinate system is nearly the same as the conventional tibia coordinate system, but for clinical application, further improvement should be done using shape information of the knee such as the inclination of the joint surface. |
| キーワード |
(和) |
膝運動 / 脛骨 / MR画像 / CT画像 / 座標系 / / / |
| (英) |
Knee motion / Tibia / MR Image / CT image / Coordinate system / / / |
| 文献情報 |
信学技報, vol. 118, no. 44, MBE2018-3, pp. 13-18, 2018年5月. |
| 資料番号 |
MBE2018-3 |
| 発行日 |
2018-05-12 (MBE) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MBE2018-3 |