| 講演抄録/キーワード |
| 講演名 |
2018-05-21 14:20
マイクロリニア超音波モータの試作と特性調査 ○出原俊介・真下智昭(豊橋技科大) US2018-13 |
| 抄録 |
(和) |
本論文では,これまでに報告された最小リニアモータの一つである超小型リニア超音波モータを提案する.固定子は,1辺の長さが2mmの金属立方体からなり,その4辺に厚さ0.3mmの圧電素子が接着されている.電極とハウジングを備えた試作ステータのサイズは,高さ2.6mm,幅2.6mm,軸方向の長さ2.2mmである.このステータ設計は,より薄いデバイスのリニアアクチュエータとして適している.駆動原理は,立方晶のステータによって生成された2つの振動モードの同時励振である.我々は立方晶の固定子による直線運動の生成に成功したが,運動のモデル化の仕方やモータ出力の最適化などの詳細はまだ研究されていない. |
| (英) |
In this paper, we propose a new micro linear ultrasonic motor involving a cuboid stator with a side length of approximately 2.6 mm, which is one of the smallest linear motors. The micro linear ultrasonic motor prototype shows an output force of approximately 10 mN, which is sufficient force to handle tiny objects. The miniature finger, a closed-loop six-bar-linkage mechanism, is built by micro fabrication and connected to the motor prototype. The first demonstration of the miniature finger is shown under a high-speed camera with a high power lens. |
| キーワード |
(和) |
圧電アクチュエータ / 超音波モータ / マイクロモータ / リニアアクチュエータ / エンドエフェクタ / / / |
| (英) |
Piezoelectric actuators / Ultrasonic motors / Linear actuators / End effectors / / / / |
| 文献情報 |
信学技報, vol. 118, no. 48, US2018-13, pp. 13-16, 2018年5月. |
| 資料番号 |
US2018-13 |
| 発行日 |
2018-05-14 (US) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
US2018-13 |