講演抄録/キーワード |
講演名 |
2018-07-27 14:15
簡易等価回路モデルを用いた車載用インバータの低ノイズ設計 ○片桐高大・高橋慶多・早乙女秀之・武藤貴哉(三菱電機) EMCJ2018-29 |
抄録 |
(和) |
パワーエレクトロニクス機器の伝導ノイズシミュレーションには,等価回路による回路解析や3次元電磁界解析が用いられる.これらの手法は伝導ノイズを高精度に予測できる一方,等価回路モデルや3次元モデルが複雑となり,ノイズ発生メカニズムや伝播経路の解明が困難になる課題があった.本報告では,車載用インバータを対象に,構成要素を全て等価回路モデル化した従来の「詳細等価回路モデル」ではなく,解析する周波数範囲を限定することで等価回路を簡略化した「簡易等価回路モデル」を提案する.簡易等価回路モデルはノイズを電流変動起因と電圧変動起因で発生するものに切り分けて分析することが可能であり,伝導ノイズを 2 MHz 以下において10 dB の精度で予測できることを確認した.また,詳細等価回路モデルと比べて解析時間を約70 % 以上削減でき,製品設計に十分適用できる目途を得た. |
(英) |
It is common to use equivalent circuit or 3D-electromagnetic field calculations for the conductive noise simulation of power-electronics products. They can predict the conductive noise with high accuracy, but it is difficult to understand mechanisms and propagation paths by the complicated simulation models. So, we propose the ‘simplified equivalent circuit model’ by limiting the frequency range up to 2 MHz. In this model, we analyzed the conductive noise by classifying into those which occur due to current variation or voltage variation. The ‘simplified equivalent circuit model’ showed that measured value and simulated value agreed within 10 dB up to 2 MHz, and reduced simulation time by approximately 70% compared with the ‘complicated equivalent circuit model’. |
キーワード |
(和) |
EMC / パワーエレクトロニクス / 伝導ノイズ / 等価回路 / 回路解析 / / / |
(英) |
EMC / Power Electronics / Conductive Noise / Equivalent Circuit / Circuit Simulation / / / |
文献情報 |
信学技報, vol. 118, no. 162, EMCJ2018-29, pp. 43-48, 2018年7月. |
資料番号 |
EMCJ2018-29 |
発行日 |
2018-07-20 (EMCJ) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2018-29 |