講演抄録/キーワード |
講演名 |
2018-08-14 13:35
小規模事業場を対象とした簡易リスクアセスメント手法の開発 ~ ロール機を対象とした5-step方式の簡易リスクアセスメントの提案 ~ ○梅崎重夫・清水尚憲・濱島京子(労働安全衛生総研) SSS2018-14 |
抄録 |
(和) |
機械に起因する労働災害を防止するには、機械の使用段階で適切なリスクアセスメントを実施する必要がある。しかし、機械の機能や危険性に対して十分な情報が得られない小規模事業場では、リスクアセスメントの担当者が想定できるリスクには明らかに限界がある。また、仮にリスクアセスメントを実施しても、専門家の関与が得られない状況の下では、実施したリスクアセスメントの妥当性の確認は困難と考えられる。そこで、製造現場で使用されるロール機を対象に、機械の使用者(ユーザー)にとって理解が容易な危害から出発する簡易リスクアセスメント手法の提案を試みた。この手法は、ステップ1(危害の明確化)、ステップ2(リスク評価)、ステップ3(保護方策の実施)、ステップ4(評価結果と残留リスクの記録)及びステップ5(見直しと訂正)の5ステップから構成される。 |
(英) |
In order to prevent occupational accidents caused by machines, it is necessary to carry out appropriate risk assessment at the stage of machine use. However, in small companies where sufficient information on the functions and dangers of machines can not be obtained, the risks assumed by risk assessment person are clearly limited. Even if risk assessment is carried out, it is considered difficult to confirm the adequacy of the risk assessment that has been implemented under circumstances where expert involvement is not obtained. Therefore, we attempted to propose a simple risk assessment method which starts from the hazard easily understood by users of machines, for roll machines used at the manufacturing site. This method consists of five steps of Step 1 (clarification of harm), step 2 (risk assessment), step 3 (execution of protection measures), step 4 (record the evaluation results and residual risk) and step 5 (review and correction). |
キーワード |
(和) |
機械安全 / ロール機 / 作業のリスクアセスメント / 保護方策 / 残留リスク / / / |
(英) |
Safety of machinery / Roll machine / Risk assessment of work / Protection measures / Residual risk / / / |
文献情報 |
信学技報, vol. 118, no. 181, SSS2018-14, pp. 5-8, 2018年8月. |
資料番号 |
SSS2018-14 |
発行日 |
2018-08-07 (SSS) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
SSS2018-14 |