講演抄録/キーワード |
講演名 |
2018-09-06 15:15
試料槽を設けたテラヘルツ表面プラズモン共鳴導波路型センサの特性評価 ○吉原 啓・柴山 純・山内潤治・中野久松(法政大) EST2018-49 エレソ技報アーカイブへのリンク:EST2018-49 |
抄録 |
(和) |
試料槽を設けたTHz帯における表面プラズモン共鳴(SPR)センサの特性を性能指数を用いることで定量的に評価する. まず, センシング部にInSbを用いた2次元センサを解析する. 試料を保持するために必要な試料槽が特性に及ぼす効果を評価する. 試料槽の屈折率が高いほど性能指数が悪化することを指摘する. 性能指数を改善するためには入出力導波路のコアの高さを低くすることが有効であることを示す. さらに, センシング部にInAsを用いたセンサを解析する. InAsを用いても, 入出力導波路のコアの高さを低くすることで性能指数を改善する効果があることを明示する. |
(英) |
Frequency responses of a terahertz surface plasmon resonance (SPR) waveguide sensor with an analyte container are quantitatively evaluated by a figure of merit (FoM). We investigate a two-dimensional sensor using InSb in the sensing section, in which the analyte container is adopted to hold an analyte. We evaluate the effect of adding the analyte container on the frequency response. It is pointed out that the FoM decreases as the refractive index of the analyte container increases. To improve the FoM, we reduce the core height of the input/output waveguide. We also analyze a sensor using InAs in the sensing section. It is shown that a reduced core height is effective in improving the FoM. |
キーワード |
(和) |
表面プラズモン共鳴 (SPR) センサ / 表面プラズモンポラリトン (SPP) / InSb / InAs / THz波 / 試料槽 / 有限差分時間領域 (FDTD) 法 / 性能指数 |
(英) |
Surface plasmon resonance (SPR) sensor / Surface plasmon polariton (SPP) / Indium antimonide (InSb) / Indium arsenide (InAs) / Terahertz (THz) wave / Analyte container / Finite-difference time-domain (FDTD) method / Figure of merit (FoM) |
文献情報 |
信学技報, vol. 118, no. 209, EST2018-49, pp. 35-39, 2018年9月. |
資料番号 |
EST2018-49 |
発行日 |
2018-08-30 (EST) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EST2018-49 エレソ技報アーカイブへのリンク:EST2018-49 |