講演抄録/キーワード |
講演名 |
2018-12-14 13:15
車載機器用EMC試験サイトの相関評価(第2報) ~ カウンターポイズ,ケーブル配線,DUTの配置対称性が計測に与える影響 ~ 鵜生高徳(デンソーEMCエンジニアリングサービス)・前田幸司(アイシン精機)・田中稔泰(マイクロウェーブファクトリー)・○岡元裕則・奥田徳嗣(KEC関西電子工業振興センター)・和田修己(京大) EMCJ2018-91 |
抄録 |
(和) |
車載機器のEMC計測は複数サイトで計測・対策されることも多く,同一DUT計測時のサイト間のデータ相関が重要である.このため,車載機器のEMCのエミッション計測時のサイト相関計測方法であるCISPR 25 Ed.4 Annex Jをベースとした分析が行われている.分析の結果,リファレンスモデルでは理想化されるグランドプレーンのセットアップ違いによる影響が大きいことが.著者らを含めた複数の研究グループから報告されている.今回,リファレンスモデルでは同様に無視されている,カウンターポイズとグランドプレーンとの接続部インピーダンス,計測用ケーブル配線の配置,DUTのセットアップ対称性について分析を行い,計測結果にあたえる影響が無視できないことを確認したため,追加報告する. |
(英) |
Because it is often case that EMC measurement of in-vehicle equipment is made at multiple test sites, the data correlation between sites with respect to the same DUT is quite important. For this reason, analyses base on CISPR 25 edition 4 Annex J, a site correlation measurement method for in-vehicle equipment defined in 2016, have been made. As a result of analyses, some study groups including the author of this paper reported that the difference in a ground plane setup has a great effect on measurement data. In the reference model, the ground plane is idealized. In addition, analyses of the connection impedances between the counterpoise and the ground plane, the arrangement of the measurement cable, and the setup symmetry of DUT were made. Those are also disregarded in the reference model, but found to have a great effect on measurement results. In this paper, the analysis result of those factors is additionally reported. |
キーワード |
(和) |
CISPR 25 / 暗室相関 / 放射エミッション / ロングワイヤ法 / ラウンドロビンテスト / / / |
(英) |
CISPR 25 / Inter-Laboratory Comparison / Radiated Emission / Long-Wire Method / Round Robin Test / / / |
文献情報 |
信学技報, vol. 118, no. 363, EMCJ2018-91, pp. 45-50, 2018年12月. |
資料番号 |
EMCJ2018-91 |
発行日 |
2018-12-07 (EMCJ) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2018-91 |
|