講演抄録/キーワード |
講演名 |
2019-01-22 14:00
[ポスター講演]局所的に外管径を拡大させた同軸型熱音響システムの検討 ○武山幸浩(同志社大)・坂本眞一(滋賀県立大)・黒木大地・大西 陸・渡辺好章(同志社大) US2018-97 |
抄録 |
(和) |
熱音響システムは,工場廃熱等の未利用エネルギーを駆動源として発電や冷却を行うことができるため,地球環境問題を解決できる可能性を持つ.本研究グループでは熱音響システムの適用範囲拡大に向けて,小型化が容易な同軸型熱音響システム(同軸型)の研究を行っている.先行研究では,同軸型の冷却能力向上を目的とし,システムの駆動源であるプライムムーバ(PM)の設置位置を変更した.PM設置位置によって冷却能力が向上することを確認したが,PM設置位置によっては粘性境界層の影響により,基本モードから二次モードに共鳴が移行して冷却能力が低下することが示唆された.本報告では,共鳴モードの移行を抑制するため共鳴管を局所的に拡大し,二次モードが励振しにくい境界条件を付与した.これにより,二次モードの発生を抑制することが確認できた.また,粘性境界層の厚み増加によるPM細管流路の閉塞を抑制することができ,基本モードの音圧を上昇させることも確認した. |
(英) |
Thermoacoustic systems can perform cooling and electric generation by using waste heat of factory and sunlight, so they can solve global environment problems. The present group is then studying the coaxial type thermoacoustic system (coaxial type) which is expected to be compact and to have wide applications. In a previous study, the position of a prime mover (PM) is modified to enhance the cooling ability of the coaxial type. In specified cases of the position of PM, the cooling ability improved. However, it is consider that completely occupying narrow channel of PM by the viscous boundary layer occurred the shift from the fundamental mode to the secondary mode. In this study, the boundary condition where the secondary mode hardly occurs was applied to the coaxial type to reduce the transition of the resonance mode. As the results, it is confirmed that the secondary mode decrease. In addition, the closed flow path in the narrow channel by increasing the viscous boundary layer does not occur. |
キーワード |
(和) |
熱音響現象 / 同軸型システム / 共鳴モード / 粘性境界層 / / / / |
(英) |
Thermoacoustic phenomenon / Coaxial system / Resonance mode / Viscous boundary layer / / / / |
文献情報 |
信学技報, vol. 118, no. 409, US2018-97, pp. 91-94, 2019年1月. |
資料番号 |
US2018-97 |
発行日 |
2019-01-15 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2018-97 |