| 講演抄録/キーワード |
| 講演名 |
2019-03-06 16:55
事前仮想接続によるローカルスポットセルへの高速接続 ○伊深和雄・松村 武・村上 誉・石津健太郎・児島史秀(NICT) RCS2018-301 |
| 抄録 |
(和) |
第5世代移動通信システム(5G)では,ミリ波帯などのより高い周波数帯の利用が検討されている.しかし,それに伴ってセルサイズが小さくなり,従来のホモジニアスネットワークによるエリア展開が困難になるため,既存のマクロセルとのヘテロジニアスネットワーク構成が検討されている.一方,5Gで実現される高度な技術を自営網で利用するためのローカル5Gの検討が始まっており,新しいサービスを安価に展開したい小さな新興企業などによる活用が期待されている.しかし,マクロセルのアシストなしでは,ローカルスポットセルへの接続遅延により,高速移動のユーザに十分なサービスの提供は困難である.また,アシスト用途のマクロセルの設置には高額な設備投資が必要となり,安価なサービス提供の妨げになる.本稿では,マクロセルなしにローカルスポットセルへの高速接続を実現する事前仮想接続方式を提案する.また,提案方式の効果について,実験による検証を行ったので,その結果を報告する. |
| (英) |
In the 5th generation mobile communication system (5G), the usage of higher frequency bands including millimeter-wave bands has been studied. However, since the cell size becomes smaller and the area development based on the homogeneous network becomes more difficult, heterogeneous networks with macro-cell and micro-cell have been investigated. Meanwhile, a local 5G working group aimed at the application of the advanced technologies in 5G to a private network has promoted the exploitation of the new services at low cost by small start-up companies. However, without the assistance of macro cells, fast connection is difficult to be provided to highly-mobile users due to the connection delay to local spot cells. In addition, installation of macro cells for assistance is costly, and thus, impairs inexpensive services. In this paper, we propose a virtual pre-connection scheme allowing high-speed connection to local spot cells without the assistance of macro cells. In addition, we empirically verify the usefulness of the proposed scheme. |
| キーワード |
(和) |
高速接続 / 事前仮想接続 / 自営網 / スポットセル / アシストセル / / / |
| (英) |
Fast connection / Virtual pre-connection / Private network / Spot cell / Assist cell / / / |
| 文献情報 |
信学技報, vol. 118, no. 474, RCS2018-301, pp. 107-112, 2019年3月. |
| 資料番号 |
RCS2018-301 |
| 発行日 |
2019-02-27 (RCS) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
RCS2018-301 |