講演抄録/キーワード |
講演名 |
2019-05-17 15:25
光ファイバによるファブリ・ペロー干渉計を用いた高精度振動測定の研究(2) ○栗林 薫・長瀬 亮(千葉工大) EMD2019-5 エレソ技報アーカイブへのリンク:EMD2019-5 |
抄録 |
(和) |
シングルモードファイバに固定し端面を凸球面研磨したPC研磨フェルールと,金属ミラーを対向させてファブリ・ペロー干渉計を構成した.DFB-LDを光源としたこの干渉計のフェルールとミラー間隙の変位に対し,反射光強度の応答は正弦波として検出される.この正弦波に対し,フェルールを連続的に駆動することで位相変調を行い,測定した干渉波からミラーに与えた振動の大きさと向きを検出できることを確認した.高精度な振動検出を行うためには,センサ部以外で変調を行う必要があると考えられる.本実験では,センサ部以外で対向させたAPC研磨フェルールを駆動した場合の干渉波の測定を行った. |
(英) |
We constructed the Fabry-Perot interferometer using a Physical Contact polished ferrule endface attached to single-mode fiber facing to a metal mirror. This interferometer with a DFB-LD light source detected reflected power waveform were sinusoidal due to interference according to displacement of gap between ferrule and mirror. At the continuous measurement of movement of mirror, we could detect double phase of reflected power due to the waveform modulation of the ferrule continuously moved on gap. We tried to modulate the interference wave an Angled Physical Contact polished ferrule position modulation other than a sensor part. |
キーワード |
(和) |
光ファイバ / ファブリ・ペロー干渉計 / 振動測定 / / / / / |
(英) |
optical fiber / Fabry-Perot interferometer / vibration sensing / / / / / |
文献情報 |
信学技報, vol. 119, no. 41, EMD2019-5, pp. 25-28, 2019年5月. |
資料番号 |
EMD2019-5 |
発行日 |
2019-05-10 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2019-5 エレソ技報アーカイブへのリンク:EMD2019-5 |