講演抄録/キーワード |
講演名 |
2019-05-20 13:50
プレス加工における被加工材の伸長量の表面波を用いた計測 ○若松星那・田川憲男・楊 明(首都大東京) US2019-10 |
抄録 |
(和) |
超音波は空気などの気体だけではなく,液体や固体にも伝搬する性質があり,物体の形状計測や非破壊検査に利用されている.光、特にレーザ光を用いて超音波と同様の計測を行う方法も存在する.しかし,計測器のコスト,サイズの面で,超音波での計測はより手軽に計測することが可能である.プレス加工では、プレス機で金型を介して鋼材などの被加工材をプレスする.その際に,プレスによる被加工材の伸長量を正確に計測できれば,加工精度の向上が期待できる.それは,金型と金型の間に存在する被加工材端面の位置(凹みの深さ)の計測によって可能である.本研究では,表面波を金型に伝搬させ,被加工材端面からの反射波の計測方法を,有限要素法シミュレーションを用いて検討する. |
(英) |
Ultrasonic waves have the property of propagating not only to gases such as air but also to liquids and solids, and are used for shape measurement of objects and nondestructive testing. There is also a method of performing measurement similar to ultrasound using light, in particular laser light. However, in terms of cost and size of the measuring instrument, it is possible to measure with ultrasonic waves more easily. In press processing, a work material such as steel is pressed through a die with a press machine. At that time, if the amount of elongation of the material to be processed by the press can be measured accurately, improvement of the processing accuracy can be expected. It is possible by measuring the position of the end face of the workpiece (the depth of the dent) existing between the molds. In this study, surface waves are propagated to the mold, and the measurement method of the reflected wave from the end face of the workpiece is examined using the finite element method simulation. |
キーワード |
(和) |
表面波 / 非破壊検査 / プレス加工計測 / / / / / |
(英) |
surface wave / non-destructive inspection / press processing measurement / / / / / |
文献情報 |
信学技報, vol. 119, no. 45, US2019-10, pp. 13-16, 2019年5月. |
資料番号 |
US2019-10 |
発行日 |
2019-05-13 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2019-10 |