講演抄録/キーワード |
講演名 |
2019-10-10 10:25
断熱的量子磁束パラメトロン16-bit桁上げ先読み加算器の誤動作原因の解析 ○田中智之・アヤラ クリストファー・チェン オリビア・齋藤蕗生・吉川信行(横浜国大) SCE2019-27 エレソ技報アーカイブへのリンク:SCE2019-27 |
抄録 |
(和) |
エネルギー効率の良い超伝導回路の一つに断熱量子磁束パラメトロン回路 (AQFP) がある。大規模なAQFP回路の動作実証のために、16-bit 桁上げ先読み加算器(16-bit KSA)を作成し、その測定を行った。設計には、これまでに実装した遺伝的アルゴリズムを用いた自動配置、配線ツールを利用した。作製した回路のジョセフソン接合数は約 5000 であり、AQFP集積回路では最大級の規模の回路である。また、回路の動作を少ない個数で効率よく確認するためのテストベクトルの決定方法についての検討も行った。これまでに部分的な動作を確認した。また、この測定結果をもとに、故障箇所の特定を試みた。本報告では、テストベクトルの決定法、測定結果、故障箇所の検討についてそれを報告する。 |
(英) |
An adiabatic quantum flux parametron (AQFP) circuit is one of the energy efficient superconducting circuits. To demonstrate large-scale AQFP circuits, we designed and measured 16-bit Kogge-Stone adder. This circuit was designed using an automated placement and routing tool that we developed before. Fabricated chips are composed of about 5000 Josephson junction and are the largest scale circuits using the AQFP circuits. We investigated a method to check the functionality of circuits using input test vectors as small as possible. We have confirmed the partial operation of the circuit and identified the location of the failure based on the measurement results. |
キーワード |
(和) |
断熱量子磁束パラメトロン / AQFP / 並列プレフィックス加算器 / トップダウン設計 / 超伝導集積回路 / / / |
(英) |
adiabatic quantum flux parametron / AQFP / carry prefix adder / top-down design / superconducting integrated circuits / / / |
文献情報 |
信学技報, vol. 119, no. 219, SCE2019-27, pp. 27-30, 2019年10月. |
資料番号 |
SCE2019-27 |
発行日 |
2019-10-02 (SCE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
SCE2019-27 エレソ技報アーカイブへのリンク:SCE2019-27 |