| 講演抄録/キーワード |
| 講演名 |
2019-12-13 14:25
比吸収率プローブ較正用導波管におけるマッチングセクションの設計 ○清水悠斗(NICT)・石井 望(NICT/新潟大)・長岡智明・和氣加奈子・渡辺聡一(NICT) EMCJ2019-77 |
| 抄録 |
(和) |
無線通信端末の適合性評価試験では,{頭部もしくは平板ファントムに生体等価液剤を満たしたものを用いる.評価指標である比吸収率は容器外部に配置された無線端末から生体等価液剤中に侵入する電界を用いて算出される.このとき,液剤中における電界強度は比吸収率プローブ(比吸収率測定用の電界プローブ)の出力電圧により測定される.この電界強度と出力電圧の関係づけ,すなわちプローブ較正は比吸収率プローブを生体等価液剤が満たされた導波管内に挿入して行われる.この較正用導波管は導波管すべてが液剤で満たされているのではなく,中空部と液剤部に分かれ,その間にマッチングセクションとして誘電体が挿入される構造となっている.従来,このマッチングセクションの設計(厚さ,電気定数)については経験則によるところが多かったことから,本研究では,較正用導波管内の電界分布を定式化し,その結果をもとにしてマッチングセクションにおける反射を最小とするための最適なパラメータを算出した.また,実在する誘電体材料を用いた際の最適なセクションの厚さについても検討し,電磁界シミュレーションによる結果と比較することでその妥当性を検討した. |
| (英) |
In a compliance test of wireless communication devices, a head or a flat phantom filled with a human tissue equivalent liquid is employed. A specific absorption rate (SAR) is evaluated by an electric field which propagates from the wireless device set on outside of the phantom into the human tissue equivalent liquid. The electric field intensity in the liquid is measured by an output voltage of a SAR probe. A relationship between the electric field and the output voltage, in other words, a probe calibration is conducted by inserting the a SAR probe to a waveguide filled with the human tissue equivalent liquid. The waveguide used for the probe calibration is divided into hollow and liquid sections, and a dielectric slab is inserted between the two sections as the matching section. The matching section design (thickness, dielectric property) have been discussed based on an experimental rule. In this study, we formulated an electric field distribution in the calibration waveguide. Secondly, based on this formulation, optimal parameters were derived to minimize a reflection in the matching section. Finally, we also considered the optimal thickness when a realistic dielectric material is used, and the result was compared with that of an electromagnetic simulation. |
| キーワード |
(和) |
SAR / プローブ較正 / 導波管 / 適合性評価 / / / / |
| (英) |
SAR / probe calibration / waveguide / exposure assessment / / / / |
| 文献情報 |
信学技報, vol. 119, no. 338, EMCJ2019-77, pp. 13-18, 2019年12月. |
| 資料番号 |
EMCJ2019-77 |
| 発行日 |
2019-12-06 (EMCJ) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMCJ2019-77 |