| 講演抄録/キーワード |
| 講演名 |
2020-03-05 10:55
インダクタレスアクティブ方向性結合器IC ○藤原孝信・萩原達也・津留正臣(三菱電機) MW2019-141 |
| 抄録 |
(和) |
方向性結合器の物理寸法を抑えるために,集中定数を用いた方向性結合器が報告されている.しかしながら動作周波数が低下するほどに必要なインダクタンス値が大きくなり,半導体チップへの集積が困難となる.本稿では抵抗と電圧増幅器のみから構成される小型なアクティブ方向性結合器を提案し,DC~100MHzにて動作する原理検証チップの評価結果を報告する.3.3V耐圧CMOSプロセスにより製造されて,コア部の面積は120umx80umと小型に収まった.評価の結果,1MHz以下における方向性が61dB以上と良好な性能が得られ,提案構成の有効性を実証した. |
| (英) |
In order to miniturize the directional coupler, one of the best option is to use inductors and capacitors instead of coupling quater length transmission line. Nethertheless when the target frequency of directioal coupler gets lower, required inductance and/or capacitance become too large where it makes impossible to integrate all the components into small die area. This report proposes design and evaluation results of Inductor-less active directional coupler composed of resistor and voltage-mode amplifier instead of quater wave-length transmission line or inductors and capacitors. An active directional coupler was fabricated using 3.3V bulk-CMOS process. Its operating frequency ranges from DC to 100MHz. The fabricated chip size is small as 120um x 80um, and measured directivity was more than 61 dB at the frequency range from DC to 1MHz. |
| キーワード |
(和) |
方向性結合器 / 小型化 / / / / / / |
| (英) |
Directional Coupler / Miniturization / / / / / / |
| 文献情報 |
信学技報, vol. 119, no. 459, MW2019-141, pp. 5-9, 2020年3月. |
| 資料番号 |
MW2019-141 |
| 発行日 |
2020-02-27 (MW) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MW2019-141 |