講演抄録/キーワード |
講演名 |
2020-05-18 15:25
中空型ステップホーンと円板を用いた小型空中超音波音源の検討 ○淺見拓哉・門前大樹・三浦 光(日大) US2020-12 |
抄録 |
(和) |
筆者らは,小型空中超音波音源として,振動の節が生じない振動モードとなる円板を用いた音源を提案している。その1つとして,円板付中空型ステップホーンを用いた60 kHz用小型空中超音波音源がある。しかし,この音源における円板及びホーンの寸法の詳細な検討は行われていない。そこで本稿は,円板とホーンの寸法について有限要素法による解析と実験による検討を行った。その結果,有限要素法を用いた解析によって円板付中空型ステップホーンの設計方法を示した。また,音源の振動特性である先端部の振動変位分布,及び放射される音波の指向性は,実験による測定結果と解析による結果がほぼ一致することがわかった。 |
(英) |
We have proposed a small aerial ultrasonic sound source using a disk of vibration mode which does not generate nodes of vibration. As one of them, there is a small aerial ultrasonic sound source for 60 kHz using a hollow stepped-horn with a disc. However, the detailed study of the disk and the horn dimensions in this sound source has not been carried out. Then, this paper examines the dimensions of the disk and the horn by the finite element method and experiments. As the results, this paper shows a design method of the hollow stepped-horn with the disc using the finite element method. It was also found that the vibration displacement distribution at the tip and the directivity of the radiated sound wave as the vibration characteristic of the sound source were almost in agreement with the experimental and analytical results. |
キーワード |
(和) |
空中超音波 / 音源 / ステップホーン / 円形振動板 / / / / |
(英) |
Aerial ultrasonic / Sound source / Stepped-horn / Disc / / / / |
文献情報 |
信学技報, vol. 120, no. 27, US2020-12, pp. 25-29, 2020年5月. |
資料番号 |
US2020-12 |
発行日 |
2020-05-11 (US) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2020-12 |