講演抄録/キーワード |
講演名 |
2020-09-02 13:10
深宇宙探査用新型アンテナのための超伝導フィルタの開発 ○林 拓磨・關谷尚人(山梨大)・大野剛志(日本通信機) SCE2020-1 エレソ技報アーカイブへのリンク:SCE2020-1 |
抄録 |
(和) |
r-Al2O3基板を用いて深宇宙探査用アンテナのための超伝導帯域通過フィルタ(BPF)の開発を行った.基板に用いたr-Al2O3は機械的強度が高く,化学的な安定性が高いことに加えて低コストであることから優れた基板材質である.一方で誘電率に異方性を持つために設計と測定結果とが一致しないという問題があった.そこで誘電率異方性を考慮し,設計に用いる実効的な比誘電率を決定して超伝導BPFの設計を行った.設計した超伝導BPFをr-Al2O3基板とYBa2Cu3Oy薄膜を用いて作製した.その結果,設計と測定結果の周波数特性がよく一致し,r-Al2O3基板を用いて設計仕様を確実に満たす超伝導BPFの実現に成功した.開発した超伝導BPFはJAXAが開発する深宇宙探査用新型アンテナに採用された. |
(英) |
A high-temperature superconducting (HTS) compact bandpass filter (BPF) for deep space exploration receiving system is developed by using r-Al2O3 substrate. An r-Al2O3 substrate has strong mechanical strength, high chemical stability and low cost. However, there is the problem that it is difficult to agree well with the simulated results and measured ones, because of dielectric anisotropy, so that there is no practical superconducting filter with r-Al2O3 substrate. Therefore, we determined the optimum dielectric constant for simulation to reduce the effect of dielectric anisotropy of the substrate. We designed and analyzed a 7-pole HTS BPF. The filter was fabricated using YBa2Cu3Oy thin film on r-Al2O3 substrate. The measured result agrees well with the simulated one and satisfied the design specification accurately. Finally, our filter was adopted for the receiving system of the JAXA Ground Station for Deep Space Exploration and Telecommunication (GREAT). |
キーワード |
(和) |
高温超伝導 / 帯域通過フィルタ / 深宇宙探査 / r-Al2O3基板 / / / / |
(英) |
high-temperature superconductor / bandpass filter / deep space exploration / r-Al2O3 substrate / / / / |
文献情報 |
信学技報, vol. 120, no. 153, SCE2020-1, pp. 1-4, 2020年9月. |
資料番号 |
SCE2020-1 |
発行日 |
2020-08-26 (SCE) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
SCE2020-1 エレソ技報アーカイブへのリンク:SCE2020-1 |
|