講演抄録/キーワード |
講演名 |
2020-10-08 11:40
[ポスター講演]BOTDRによるマルチコアファイバを用いた大型線状構造体の形状センシングの基礎検討 ○小林真輝人・前田恭輝・藤 公博(東大)・半澤信智(NTT)・小泉健吾・村井 仁(OKI)・和田良太(東大)・松井 隆・中島和秀(NTT)・村山英晶(東大) OFT2020-19 |
抄録 |
(和) |
大型の線状構造体, 特にライザーや係留索のような海洋構造物はその挙動を直接観測することが困難であり, 繰り返し生じる大きな変形がシステムや構造の失敗の原因となる. それゆえ, 形状センシングによってこれらの変形を継続的にモニタリングすることは構造やシステムの健全性の保全に有用である. 本研究では, 長距離を測定するためにBOTDRを, 比較的小さな曲率を測定するために太径のマルチコアファイバを用いて, 大型線状構造体を対象とする形状センシングシステムを構築した. 実験によってこのシステムを検証し, 直径1.0mと1.9mの円と直線からなる形状がよく同定された. より正確なひずみの測定によって、より精度の高い形状センシングが期待できる. |
(英) |
It is difficult to observe the behavior of large-scale line structures used in offshore systems directly, such as risers, and mooring lines. Their large and repeated deformation can cause system or structural failure. Therefore, it is helpful for system integrity to monitor there deformation continuously by shape sensing. In this study, shape sensing system for the large-scale line structure was implemented with BOTDR and thicker Multi-core fiber. The system was validated experimentally and shapes including straight line and circle with diameter is 1.0 m or 1.9 m were identified well. More accurate measurement of strains is expected to lead to more accurate shape sensing. |
キーワード |
(和) |
形状センシング / BOTDR / MCF / 構造健全性監視 / 大型線状構造体 / 変形モニタリング / / |
(英) |
Shape sensing / BOTDR / MCF / Structural Health Monitoring / large-scale line structures / deformation monitoring / / |
文献情報 |
信学技報, vol. 120, no. 184, OFT2020-19, pp. 41-45, 2020年10月. |
資料番号 |
OFT2020-19 |
発行日 |
2020-10-01 (OFT) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2020-19 |