講演抄録/キーワード |
講演名 |
2021-03-05 16:55
OAMビーム制御によるUCA軸ずれ補償の検討 ○櫻谷信彦・西村寿彦・大鐘武雄(北大)・旦代智哉・内田大輔(東芝) RCS2020-260 |
抄録 |
(和) |
近年,無線デバイスの増加によりモバイルデータトラフィックが爆発的に増加している.
それに伴い,フロントホールやバックホールにおいても大容量化が求められている.
その解決策として,軌道角運動量(OAM)を用いた空間多重伝送が注目を集めている.
そのOAM多重を実現する手法の一つに,等間隔円アレー(UCA)を用いたものがある.
送受信側にUCAを設置した際に,設置誤差がある場合,急激に特性が劣化することが知られている.
本稿では,UCAの設置高が送受信側でずれた場合と,送受信側でUCAの面が傾いている場合についての特性劣化を受信側のMMSEウェイトと送信側のビーム制御によって補償する.
具体的には,送信UCAの各素子において位相調整をし,メインビームを受信UCAに向かうように制御することで受信電力を増加させ,特性劣化を補償する.
ビーム制御を合わせて用いることで広い角度範囲に対応できることが分かった. |
(英) |
In recent years, mobile data traffic has increased explosively due to increasing wireless devices. Capacity enhancement is required for fronthaul and backhaul accordingly.
Spatial multiplex transmission using orbital angular momentum (OAM) has been attracting attention as a solution.
One of the OAM multiplexing methods is the use of uniform circular array (UCA).
It is known that the performance deteriorates seriously if there are misalignments of the UCA at transmitter and/or receiver.
In this paper, we propose a method of compensation for the degradation with beam control and/or MMSE weights in the case that the UCA installation height is shifted on the transmitter or receiver and the UCA surface is slanted on the transmitter.
Specifically, the received power is increased by adjusting the main beam toward the transmit UCA to compensate for the degradation.
It is found that by using beam control, total throughput is improved compared to using only MMSE weights.
By using the beam control method together, it was found that the method can be applied to a wide range of angles. |
キーワード |
(和) |
OAMモード多重 / 等間隔円アレー(UCA) / 空間多重 / 設置誤差 / ビーム制御 / / / |
(英) |
Orbital angular momentum / Uniform circular array / Spatial multiplexing / misalignment / beam control / / / |
文献情報 |
信学技報, vol. 120, no. 404, RCS2020-260, pp. 261-266, 2021年3月. |
資料番号 |
RCS2020-260 |
発行日 |
2021-02-24 (RCS) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
RCS2020-260 |