Paper Abstract and Keywords |
Presentation |
2021-05-20 13:05
Development of waveguide based on 3D printing with plating on plastic technology in V- and D-band Kohei Fujiwara, Ryuichi Kobayashi, Satoshi Kuwahara, Yuta Watanabe, Kohei Takizawa, Shota Takemura (TIRI) MW2021-5 Link to ES Tech. Rep. Archives: MW2021-5 |
Abstract |
(in Japanese) |
(See Japanese page) |
(in English) |
In general, a waveguide part is expensive and has a good thermal conductivety because of based on copper alloy. Therefore, we developed a waveguide, which is based on an additive manufactureing with plastic plating technology. We demonstrated 5-cm-length waveguide in V- and D-band. These waveguide have a transmission of −0.2 dB at a center frequency of 62.5 GHz and −1.4 dB at a center frequency of 140 GHz. |
Keyword |
(in Japanese) |
(See Japanese page) |
(in English) |
V-band / D-band / 3D-printing / Additive Manufactureing / plating on plastic / / / |
Reference Info. |
IEICE Tech. Rep., vol. 121, no. 31, MW2021-5, pp. 1-4, May 2021. |
Paper # |
MW2021-5 |
Date of Issue |
2021-05-13 (MW) |
ISSN |
Online edition: ISSN 2432-6380 |
Copyright and reproduction |
All rights are reserved and no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the publisher. Notwithstanding, instructors are permitted to photocopy isolated articles for noncommercial classroom use without fee. (License No.: 10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
Download PDF |
MW2021-5 Link to ES Tech. Rep. Archives: MW2021-5 |