講演抄録/キーワード |
講演名 |
2021-05-27 14:35
フレキシブル熱電発電デバイスの発電特性評価 ○神作大輝・川瀬暢大・カーン ファイザン・アロクヤサミ ペリヤナヤガクリスティ(静岡大)・山川俊貴(熊本大)・池田和司(奈良先端大)・早川泰弘・村上健司・下村 勝・池田浩也(静岡大) ED2021-4 CPM2021-4 SDM2021-15 |
抄録 |
(和) |
身の回りにある廃熱を電気として利用するために,高効率フレキシブル熱電発電デバイスの開発を行っている.本研究では,炭素布をp型材料,ニッケル銅布をn型材料,銀布を金属材料として50対のπ型モジュール構造を試作して,自作の熱電特性評価装置により熱起電力と出力電力の測定を行った.その結果,5 Kの温度差を印加することにより0.15 mVの熱起電力が得られた.この値はそれぞれの布材料のゼーベック係数から期待される熱起電力の約10分の1であり,その原因として布材料間の接触熱抵抗と金属布の熱抵抗の影響が考えられる.また,そのとき得られた最大出力電力は6.4 pWであった. |
(英) |
For using the environmental waste heat in our society, we have developed a high-efficiency flexible thermoelectric power generators (TEPGs). In this study, we have measured the thermoelectromotive force (TEMF) and the output power of a pro-totype device with 50 pairs of π-type structures using a homemade measurement system for flexible TEPGs to evaluate the characteristics along the thickness direction. The prototype device consisted of carbon fabrics (CAF) as p-type materials, nickel-copper fabrics (NCF) as n-type materials, and silver fabrics (AGF) as electrodes. As a result, applying a temperature difference of 5 K, we obtained the TEMF of 0.15 mV and the maximum output power of 6.4 pW. The obtained TEMF was smaller than that expected from the Seebeck coefficients of each fabric, which would be caused by the influence of contact thermal resistance at semiconductor-fabric/AGF interfaces and thermal resistance of AGF. |
キーワード |
(和) |
フレキシブル熱電材料 / ゼーベック効果 / π型構造 / / / / / |
(英) |
Flexible thermoelectric materials / Seebeck effect / π-type structures / / / / / |
文献情報 |
信学技報, vol. 121, no. 46, SDM2021-15, pp. 15-18, 2021年5月. |
資料番号 |
SDM2021-15 |
発行日 |
2021-05-20 (ED, CPM, SDM) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
ED2021-4 CPM2021-4 SDM2021-15 |