| 講演抄録/キーワード |
| 講演名 |
2021-08-27 14:20
超音波振動子の駆動位相差制御による粉体搬送 ○中岡夏海・小山大介(同志社大) US2021-29 |
| 抄録 |
(和) |
本報告では,板の超音波振動を利用した粉体表面形状の平坦化について検討した.本システムは,V字型のアルミニウム製振動板と2つの超音波振動子で構成される.振動板の形状と振動子設置位置は有限要素解析によるシミュレーション結果から決定した.周波数27.4 kHzにおいて,超音波振動子の縦振動モードがV字型振動板の共振たわみ振動モードに変換され,粉体の搬送および表面形状の平坦化が可能となった.振動板上の粉体はたわみ定在波の振動節部に集約され,振動板上の音圧分布と粉体の分布には相関関係が見られた.振動子の駆動位相差を変えて平坦精度を測定した結果,たわみ振動の定在波比が小さいほど平坦精度が高くなることがわかった. |
| (英) |
This paper investigates a method to level a surface profile of powder using the ultrasound vibration on a plate. The system consists of a V-shaped plate and two ultrasound transducers, and the configuration of the plate was determined from the simulation results by finite element analysis. The resonance longitudinal vibration of the transducers generates the resonance flexural vibration mode of the plate at 27.4 kHz, resulting in the transportation and leveling of the powder. The powder was aggregated to the nodal positions of the flexural standing wave, and there was a correlation between the sound pressure distribution on the plate and the distribution of the powder. The leveling accuracy was investigated with changing the driving phase difference between the transducers, and it was found that a smaller standing wave ratio of the flexural vibration gave a higher leveling accuracy. |
| キーワード |
(和) |
超音波 / たわみ振動 / 粉体 / ならし / 定在波比 / / / |
| (英) |
Ultrasound / flexural vibration / powder / leveling / standing wave ratio / / / |
| 文献情報 |
信学技報, vol. 121, no. 163, US2021-29, pp. 9-13, 2021年8月. |
| 資料番号 |
US2021-29 |
| 発行日 |
2021-08-20 (US) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
US2021-29 |