講演抄録/キーワード |
講演名 |
2022-03-04 15:00
接点開離時直流アーク放電のインダクタンスと磁気吹き消し効果の影響 ○藁谷優人・吉田 清・澤 孝一郎(日本工大) EMD2021-20 エレソ技報アーカイブへのリンク:EMD2021-20 |
抄録 |
(和) |
近年、太陽光発電、電気自動車の普及により、直流給電システムが広く使用されてきている。周知のように、直流遮断は、交流に比べ、電流のゼロ点がないため、難しい。そのため、磁気吹き消し機構が使われることが多い。この場合、小電流でアークの継続時間が長くなる現象が知られている。また、負荷としては、コイルなどインダクタンス成分を持つものも多数ある。本研究では、直流遮断における負荷インダクタンスの影響を、主として100V、30A回路で、磁気吹き消しのない場合とある場合について調べた。実験結果より、本回路条件では、磁気吹き消しがない場合はインダクタンスによる影響はまり大きくない。しかし、磁気吹き消しを使用した場合は、インダクタンスによりかなり継続時間が長くなる。また、負荷インダクタンスとしては、通常のインダクタンス一定10mHの場合と、時定数を2ms一定にした2種類を用いた。その結果、時定数一定の場合は、小電流でのアーク継続時間のピーク値が、インダクタンス一定の場合より数倍長くなることなどを明らかにした。 |
(英) |
DC current switching has been getting important as DC grid systems and electrical vehicles have been more popular. As well-known, DC switching is more difficult than AC switching due to no zero point of load current. So, a magnetic blow-out is generally used to extinguish arc discharge. In that case, arc duration becomes maximum at a lower current than the rated one. It is called Critical load current. In this paper, the effect of load inductance on arc characteristics including the critical load current is examined for W and Ag contacts at three opening speeds. As a result, it can be made clear that the maximum arc duration at small current becomes longer than that of resistive load, especially for inductive load condition of time constant 2 ms, while the effect of load inductance is not large for 100V, 30A circuit condition in case of no magnetic blow-out. |
キーワード |
(和) |
アーク放電 / 電気接点 / 直流遮断 / 電磁コンタクタ / 磁気吹き消し / インダクタンス / / |
(英) |
Arc discharge, / Electric contact / DC shutdown / Electromagnetic contactor / Magnet blowout / Inductance / / |
文献情報 |
信学技報, vol. 121, no. 405, EMD2021-20, pp. 31-36, 2022年3月. |
資料番号 |
EMD2021-20 |
発行日 |
2022-02-25 (EMD) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2021-20 エレソ技報アーカイブへのリンク:EMD2021-20 |