講演抄録/キーワード |
講演名 |
2023-03-03 15:15
光ファイバ出射光スポット内のパターン変動のRIPOC法を利用した解析 ○佐藤琉聖・長谷川 誠(千歳科技大) EMD2022-27 |
抄録 |
(和) |
光ファイバの一端にレーザ光を入射し、他端からの出射光をスクリーンに投影すると、出射光スポット内にスペックルパターンと呼ばれる粒状の不均一パターンが観測される。著者らはこれまでに、マルチモード光ファイバをループ状に支持板に設置し、支持板に回転運動を加えて傾斜させるように移動させると、スペックルパターンが回転する現象が観測されることを確認している。今回は,RIPOC法を利用した測定結果と画像処理ソフトを用いた手動測定の結果とを比較し、スペックルパターンの回転角度の解析手法を検討した。その結果として、RIPOC法で得られた回転角度と手動測定によって得られた回転角度とはおおむね近い値を示し、その値は支持板の傾斜角度の約半分の値となる傾向も確認された。 |
(英) |
When laser light beams are allowed to propagate from one end of an optical fiber to the other end and further to be output onto a screen, irregular pattern called as speckle pattern can be observed in an output light spot. The authors previously reported the rotating phenomenon of speckle pattern when the optical fiber was placed onto a support plate in a loop-shape and the support plate was tilted. In this paper, an analysis procedure of a rotation angle of the speckle pattern in such rotation phenomenon has been studied through comparison between the results obtained from measurements utilizing an RIPOC method and the results obtained from manual measurements with an image processing software. As a result, the RIPOC method was confirmed to provide the rotation angle values close to the values obtained from the manual measurements. The obtained rotation angle values were confirmed be almost a half of the tilt angle of the support plate. |
キーワード |
(和) |
光ファイバ / スペックルパターン / レーザ光 / センシング / POC / RIPOC / / |
(英) |
Optic fiber / Speckle pattern / Laser light beams / Sensing / POC / RIPOC / / |
文献情報 |
信学技報, vol. 122, no. 416, EMD2022-27, pp. 35-40, 2023年3月. |
資料番号 |
EMD2022-27 |
発行日 |
2023-02-24 (EMD) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2022-27 |