| 講演抄録/キーワード |
| 講演名 |
2023-03-03 15:30
光ファイバを利用したひずみセンサの研究 ○荒畑圭諒・脇 貴哉・長瀬 亮(千葉工大) EMD2022-28 |
| 抄録 |
(和) |
光ファイバセンシングは電気式測定技術と比較して耐電磁ノイズやサージ電流に強いことから,様々な場面での活用を想定して研究されている.現在使われている光ファイバセンサは高精度である反面,高価なものが多い.本研究の目的は,光ファイバに一定以上の曲げを与えると発生する曲げ損失を利用した安価なひずみセンサの作製である.今回,簡易なセンサ構造の光ファイバセンサを用いて光損失量の増大を利用したひずみ測定で,再現性の良い結果を得られたため報告する. |
| (英) |
Since optical fiber sensing is mere resistant to electromagnetic noise and surge currents than electrical measurement technology, it has been studied for use in a variety of situations. While the optical fiber sensors currently in use are highly accurate, many of them are expensive. The purpose of this study is to fabricate an inexpensive strain sensor using the bending loss that occurs when an optical fiber is subjected to bending above a certain level. In this study, we report the results of strain measurement using an optical fiber sensor with a simple sensor structure and using an increase in the amount of optical loss with good reproducibility. |
| キーワード |
(和) |
光ファイバセンサ / 曲げ損失 / ひずみ測定 / / / / / |
| (英) |
Optical fiber sensors / Bending loss / Strain measurement / / / / / |
| 文献情報 |
信学技報, vol. 122, no. 416, EMD2022-28, pp. 41-45, 2023年3月. |
| 資料番号 |
EMD2022-28 |
| 発行日 |
2023-02-24 (EMD) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMD2022-28 |