| 講演抄録/キーワード |
| 講演名 |
2024-01-19 09:35
プリント配線板電源層における放射雑音の低減 ~ 円形格子電源層 ~ ○江副経介・佐々木伸一(佐賀大) EMCJ2023-87 |
| 抄録 |
(和) |
近年,プリント基板において搭載LSIの高速化により発生する放射雑音が問題となっている.本研究室では,放射雑音の低減方法として,基板端電源層間に抵抗を付加する抵抗付加法を提案している.これまで,正方形格子電源層基板において,最適な抵抗値は格子線幅と同じ線幅の伝送線路によって求められることを確認している.本研究では,電源層に円形の穴を空けた円形格子電源層における,正方形格子電源層と比較した構造による雑音の影響,最適な付加抵抗値の検討,円形格子電源層を多層にした場合のスルーホールを用いた抵抗付加法の有効性について,三次元電磁界解析により検討を進めた. |
| (英) |
In recent years, radiated noise generated by the high speed of the mounted LSI has become a problem in printed circuit boards. In our laboratory, we propose a resistor addition method in which a resistor is added between the power supply layers at the end of the board as a method of reducing radiated noise. So far, it has been confirmed that the optimal resistance value of a square lattice power supply layer board is obtained by a transmission line with the same line width as the grid line width. In this study, we examined the effect of noise due to the structure of a circular lattice power supply layer with a circular hole in the power supply layer, the examination of the optimal addition resistance value, and the effectiveness of the resistance addition method using through-holes when the circular lattice power supply layer is made into multiple layers by three-dimensional electromagnetic field analysis. |
| キーワード |
(和) |
電源雑音 / 放射雑音 / 円形格子電源層 / / / / / |
| (英) |
Power Noise / Radiated Noise / Circular Grid Power Layer / / / / / |
| 文献情報 |
信学技報, vol. 123, no. 346, EMCJ2023-87, pp. 1-6, 2024年1月. |
| 資料番号 |
EMCJ2023-87 |
| 発行日 |
2024-01-12 (EMCJ) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMCJ2023-87 |