講演抄録/キーワード |
講演名 |
2024-05-24 14:45
自己発電型デバイスに向けたフレキシブル熱電発電モジュールの開発 ○池田浩也・フドゥザイファ アル ヒジュリ・小野田 樹・本名智朗・井上 翼・早川泰弘(静岡大)・池田和司(奈良先端大)・濱﨑 拡(静岡大) ED2024-7 CPM2024-7 SDM2024-14 |
抄録 |
(和) |
三種類の導電性布を n 型半導体,p 型半導体,および金属電極とみなして試作したフレキシブル発電デバイスについて発電特性を測定した結果,発電デバイスの内部抵抗が発電特性を制限していたため,本研究では Π 型モジュールに用いた異種布界面の電気的接触抵抗の測定を行った.得られた接触抵抗値から算出した発電デバイス内の総接触抵抗は 17.9Ω であり,内部抵抗 667Ω の 2.7% であった.また発電特性の向上には印加した温度勾配が効率的にフレキシブル熱電材料にかかる必要があるため,異種布間の界面熱抵抗の測定を過渡熱測定法および定常熱測定法にて進めており,試料の熱抵抗および熱抵抗率が確認できた. |
(英) |
We fabricated a flexible power generator based on three kinds of conductive fabrics as an n-type semiconductor, a p-type semiconductor, and a metallic electrode. The experimental results indicated that the internal resistance in the device degrades the output power, suggesting large contact resistance between different fabrics. In the present study, the total contact resistance in the Π-type module was evaluated to amount to 17.9Ω which was 2.7% of the internal resistance 667Ω. In addition, because external temperature gradient must be applied effectively to the thermoelectric materials, we measured the interfacial thermal resistance between different fabrics using both thermal transient measurement and steady-state thermal resistance method. We have got the thermal resistance and thermal resistivity for samples. |
キーワード |
(和) |
フレキシブル熱電発電モジュール / 接触抵抗 / 界面熱抵抗 / / / / / |
(英) |
flexible thermoelectric power generator / electrical contact resistance / interfacial thermal resistance / / / / / |
文献情報 |
信学技報, vol. 124, no. 45, SDM2024-14, pp. 21-24, 2024年5月. |
資料番号 |
SDM2024-14 |
発行日 |
2024-05-17 (ED, CPM, SDM) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
ED2024-7 CPM2024-7 SDM2024-14 |