| 講演抄録/キーワード |
| 講演名 |
2024-10-10 15:20
[ポスター講演]機械式LPFGの加圧角度による屈折率分布の解析 ○濱崎佳真・久保田寛和・三好悠司(阪公立大) OFT2024-57 |
| 抄録 |
(和) |
長周期ファイバグレーティング(LPFG)は、温度や圧力などのセンサ、ファイバアンプの利得平坦化フィルタなどの様々なデバイスへの利用が検討されている。機械式LPFGは、ファイバに周期的な圧力を加えることで周期的な屈折率変化を生み出し、共振を起こすものである。基本モードであるLP01モードとLP1nモードのような非対称なモードの結合を起こすには、屈折率変化を非対称にする必要ある。そこで機械式LPFGでは、ファイバへの加圧部分の角度を斜めにすることで非対称な屈折率変化を作り出す。しかし、従来の機械式LPFGの解析ではファイバへの加圧部分の角度を斜めしたことで発生する屈折率変化を考慮したものではない。そこで本研究では、簡易化したモデルを用い応力解析を行い、ファイバ内の屈折率を求めた。 |
| (英) |
Long-period fiber gratings (LPFGs) are being considered for use in a variety of devices, including temperature and pressure sensors and gain flattening filters for fiber amplifiers. Mechanical LPFGs generate periodic refractive index changes by applying cyclic pressure to the fiber, which causes resonance. In order to cause coupling of asymmetric modes such as LP01 mode and LP1n mode, which are fundamental modes, it is necessary to make the refractive index change asymmetric. Therefore, mechanical LPFG creates asymmetric refractive index change by tilting the angle of the pressurized part to the fiber. However, the conventional mechanical LPFG analysis does not take into account the refractive index change caused by the oblique angle of the pressurized portion of the fiber. Therefore, in this study, a simplified model was used and stress analysis was performed to obtain the refractive index in the fiber. |
| キーワード |
(和) |
LPFG / 光ファイバ / 応力解析 / / / / / |
| (英) |
LPFG / Optical Fiber / Stress Analysis / / / / / |
| 文献情報 |
信学技報, vol. 124, no. 202, OFT2024-57, pp. 112-116, 2024年10月. |
| 資料番号 |
OFT2024-57 |
| 発行日 |
2024-10-03 (OFT) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
OFT2024-57 |