| 講演抄録/キーワード |
| 講演名 |
2024-11-15 13:00
誘電体導波路間接続コネクタの性能評価 ○松平淳哉(NTTドコモ)・濱田裕史(NTTドコモ/現所属:NTT)・福田敦史・羽田文彦・鈴木恭宜(NTTドコモ) MW2024-138 |
| 抄録 |
(和) |
高周波数帯の電波を低損失で伝送できる誘電体導波路により電波障害物を回避し,見通し伝搬環境を確保することは,高周波数帯を用いた通信エリアを構築するための有効な手段となる.しかし,誘電体導波路は製造上の観点から長尺化に限度がある.そのため,長尺導波路を構成するための手法として導波路を接続するコネクタを用いることを検討している.本報告では,導波路間接続用コネクタの試作および評価結果について述べる.28 GHz帯での利用を目的に設計したコネクタを測定した結果,26 GHzから40 GHzにおいて導波路を接続できることが確認できたが,28 GHz帯での挿入損失は4 dB程度であり,高周波数帯ほど挿入損失が小さく,40 GHz帯では0.5 dB程度となることが分かった.また,電磁界解析より挿入損失の原因はコネクタでの構造上の問題による電波漏洩によることが分かり,その改善方法について示した. |
| (英) |
To avoid obstacles and ensure a line-of-sight propagation environment by dielectric waveguides that can transmit high-frequency signals with low loss is an effective means of constructing communication areas utilizing high-frequency bands. However, due to manufacturing limitations, the length of dielectric waveguides is restricted. Therefore, we are considering using connectors to connect waveguides as a method to form long waveguides. In this paper, we describe the prototyping and evaluation results of a connector for waveguide connections. Measurements of the connector designed for use in the 28 GHz band confirm that waveguides could be connected between 26.5 GHz and 40 GHz. However, the insertion loss at the 28 GHz band is about 4 dB, with the insertion loss decreasing at higher frequencies, reaching approximately 0.5 dB at the 40 GHz band. Electromagnetic field analysis reveals that the cause of this insertion loss is due to radio wave leakage resulting from structural issues in the connector, and a method for improvement is proposed. |
| キーワード |
(和) |
ミリ波 / 誘電体導波路 / 5G / / / / / |
| (英) |
Millimeter-Wave / Dielectric Waveguide / 5G / / / / / |
| 文献情報 |
信学技報, vol. 124, no. 261, MW2024-138, pp. 75-78, 2024年11月. |
| 資料番号 |
MW2024-138 |
| 発行日 |
2024-11-07 (MW) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MW2024-138 |
|