| 講演抄録/キーワード |
| 講演名 |
2025-05-15 11:50
150GHz帯定在波励振導波管狭壁上スロットアレーアンテナの設計 ○櫻井亮輔・広川二郎・戸村 崇(Science Tokyo)・猪又 稔・山田 渉(NTT) AP2025-13 |
| 抄録 |
(和) |
150GHz帯チャネルサウンダ用として定在波励振導波管狭壁上スロットアレーアンテナを設計した.微細加工が必要であるため,積層薄板拡散結合で製作する.アンテナはE面ホーンを用いた給電部と4本の方形導波管を用いた放射部の組み合わせで構成されている.158GHzでの正面方向の主偏波成分の利得は24.8dBiであり,E面の3dBビーム幅は4.8°と狭ビームである.反射は156.7 GHz ~ 159.4 GHzで10 dB以下である.本稿ではT分岐への反射抑圧壁の導入により更なる広帯域化を図る.T分岐への反射抑圧壁の導入,給電部の構造の変更で,放射特性を大きく変化させずに広帯域設計をする.158GHzでの正面方向の主偏波成分の利得は24.7dBiであり,E面の3dBビーム幅は4.6°と狭ビームである.反射は152.9 GHz ~ 161.3 GHzでS11が10 dB以下である. |
| (英) |
We design a hollow-waveguide narrow-wall slot array antenna excited by a standing wave for a channel sounder in 150 GHz band. The antenna is fabricated by diffusion bonding of laminated thin-plates due to the need for micro fabrication. The antenna consists of the feeding part using an E-plane horn and the radiating part using four rectangular waveguides. The realized gain of the main polarization component is 24.8 dBi and the 3 dB beamwidth in the E-plane is 4.8° at 158 GHz. The reflection is less than -10 dB over 156.7 GHz ~ 159.4 GHz. In this manuscript, we introduce the reflection suppression wall in the T-junction to broaden the bandwidth. We broaden the bandwidth without changing the radiation characteristics by introducing the reflection suppression wall in the T-junction and changing the feeding part. The realized gain of the main polarization component is 24.7 dBi and the 3 dB beamwidth in the E-plane is 4.6° at 158 GHz. The reflection is less than -10 dB over 152.9 GHz ~ 161.3 GHz. |
| キーワード |
(和) |
スロットアレーアンテナ / ミリ波アンテナ / チャネルサウンダ / E面ホーン / 変形I型スロット / / / |
| (英) |
slot array antenna / millimeter-wave antenna / channel sounder / E-plane horn / modified I-shaped slot / / / |
| 文献情報 |
信学技報, vol. 125, no. 23, AP2025-13, pp. 12-15, 2025年5月. |
| 資料番号 |
AP2025-13 |
| 発行日 |
2025-05-08 (AP) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
AP2025-13 |