| 講演抄録/キーワード |
| 講演名 |
2025-10-24 15:55
ALMA2受信機への搭載を目指した5セクション型広帯域90度ハイブリッドの設計と試作 ○櫨元 強・牛山太陽・佐々木 舞・冨岡紗有・小野 哲(電通大)・増井 翔・小嶋崇文(国立天文台)・酒井 剛(電通大) EMCJ2025-66 MW2025-152 EST2025-79 |
| 抄録 |
(和) |
筆者らは,電波望遠鏡の中間周波数(Intermediate Frequency; IF)帯域の広帯域化に必要なコンポーネントとなる90度ハイブリッドの開発に取り組んできた.90度ハイブリッドの広帯域化のためには,ストリップ線路構造において,結合線路間の強結合が求められる.そこでパターン基板間の絶縁層として,25,textmu mのポリイミドフィルムを採用し,広帯域な90度ハイブリッドを実現するための構造最適化を行った.しかし,測定結果では基準とするポートによって特定の周波数特性の変化傾向が確認された.その原因を究明するために,マイクロフォーカスX線CT装置を用いた.撮影画像から,結合線路間の距離が設計段階と比較してずれが生じていることが明らかとなった.その原因として,パターニングとドリル工程でのアライメント誤差が考えられる.そこで基板の貼り合わせ方法を変更すると,周波数特性が改善された.再度X線CT観察を行うと,結合線路間の距離のずれは小さくなっていることが確認された. |
| (英) |
We have been developing quadrature hybrid couplers, which are essential RF components of radio wave telescopes for expanding the intermediate frequency (IF) band. The quadrature hybrid requires strong coupling characteristics between the coupled lines using the strip line structure. So, we used a polyimide film of 25,textmu m thickness as the insulating layer between the patterned substrates and optimized the structure to achieve wideband characteristics. However, the measured reflection characteristics showed a tendency to be affected by the circuit patterns. Therefore, we employed a micro-focus X-ray CT scanner to investigate the cause. We confirmed the distance between the coupled lines, which was different from the patterns which is configured using an electromagnetic simulator, using images of the scanner. We suspected alignment errors of the patterning and drilling processes caused this deviation. Consequently, we modified the laminate method of substrates, which could improve the frequency characteristics. Subsequently, we confirmed the deviation in distance by using images of the scanner. |
| キーワード |
(和) |
90度ハイブリッド / 結合線路 / X線CT検査 / / / / / |
| (英) |
Quadrature hybrid coupler / coupled line / X-ray CT scanner / / / / / |
| 文献情報 |
信学技報, vol. 125, no. 209, MW2025-152, pp. 151-156, 2025年10月. |
| 資料番号 |
MW2025-152 |
| 発行日 |
2025-10-16 (EMCJ, MW, EST) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMCJ2025-66 MW2025-152 EST2025-79 |
|