| 講演抄録/キーワード |
| 講演名 |
2026-01-22 13:20
[ポスター講演]厚膜チューブの2モードNANFの特性 ○太田翔心(阪公立大)・久保田寛和(追大) OFT2025-72 |
| 抄録 |
(和) |
空間分割多重(SDM)技術による伝送容量の拡大が求められる中、既存の石英ガラスファイバの物理的限界を克服しうる中空コアファイバの開発は、次世代通信ネットワークの核となる重要な要素となっている。我々は、超低損失かつ低遅延な特性を持つNested Antiresonant Nodeless Fiber(NANF)に着目した。従来のNANF厚さ1µm未満のガラス壁を均一に作る難易度が高いという課題があったが、本研究では製造の容易化を目的として、ガラスチューブの厚さを1.65 µmとした「厚膜チューブNANF」を提案し、数値解析を用いて損失特性や群遅延差(DMD)への影響について解析を行った 。
今回、製造の容易性と2モード伝送特性の両立を目指し、設計パラメータが各モードの閉じ込め損失やモード間損失差に与える影響を解析することで、次世代SDM伝送路としての適応性を検討した。 |
| (英) |
As the demand for expanded transmission capacity via Spatial Division Multiplexing (SDM) grows, the development of hollow-core fibers (HCFs)—which can overcome the physical limitations of conventional silica glass fibers—has become a pivotal element for next-generation communication networks. In this study, we focused on Nested Antiresonant Nodeless Fibers (NANF) due to their ultra-low loss and low-latency characteristics. While conventional NANFs present manufacturing challenges regarding the uniform fabrication of glass walls thinner than 1 µm, we propose a "thick tube NANF" with a glass thickness of 1.65 µm to facilitate easier manufacturing. We performed numerical analyses to evaluate the impact of this design on loss characteristics and Differential Mode Delay (DMD). To achieve a balance between manufacturability and two-mode transmission performance, we investigated how design parameters influence confinement loss and differential mode loss (DML), assessing the fiber's suitability as a next-generation SDM transmission medium. |
| キーワード |
(和) |
反共鳴ファイバ / 数モードファイバ / 中空コアファイバ / / / / / |
| (英) |
Antiresonant fiber / Few-mode fiber / Hollow-core fiber / / / / / |
| 文献情報 |
信学技報, vol. 125, no. 324, OFT2025-72, pp. 6-9, 2026年1月. |
| 資料番号 |
OFT2025-72 |
| 発行日 |
2026-01-15 (OFT) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
OFT2025-72 |