| 講演抄録/キーワード |
| 講演名 |
2026-03-02 10:30
19コアMCFを用いたSDM-EONにおけるXTブロッキングを考慮したコア設定手法の評価 ○矢ヶ崎旺輔・馬場健一(工学院大) PN2025-45 |
| 抄録 |
(和) |
近年の通信トラヒック増大に対応するため,光基幹ネットワークの分野ではマルチコアファイバ (MCF)が注目されている.MCFを用いることにより,伝送容量は大幅に上昇することが期待されるが,同時に,隣接コアから漏れ出る信号がXTとして自身の信号に影響を与え,伝送品質を低下させるという問題も懸念される.そこで本稿では,利用する変調方式等から光パスのXTへの耐性を評価し,XTによる棄却が生じないように光パスが使用するコアを制御する手法を提案する.具体的には,XT制約による光パスの棄却が発生しないよう利用できるコアの位置や変調方式を調整することで適切な資源利用を図る.シミュレーションの結果,提案した3種類のコア設定における要求棄却率を比較し,光パスが利用できるコアの柔軟性を高めることで要求棄却率を低減できることが分かった.また発生する光パス全体の公平性の検証を行い,コア設定の違いによって光パスの棄却傾向に偏りが生じることが分かった. |
| (英) |
Multi Core Fiber (MCF) is noticed in the field of optical backbone network in order to cope with the recent increase in communication traffic. By using MCF, the transmission capacity is expected to increase drastically, but at the same time, there is a problem that the signal leaking from the adjacent core affects its own signal as XT, and the transmission quality degrades. Then, in this paper, was proposed a method to control cores used by optical paths so as not to cause rejection by XT by evaluating resistance of optical paths to XT from used modulation methods, etc.. Concretely, appropriate resource utilization is attempted by adjusting position and modulation system of the usable core so that rejection of the optical path by XT constraint does not occur. The simulation results show that the request rejection rate can be reduced by increasing the flexibility of the core that the optical path can use. And, the fairness of the whole generated optical path was verified, and it was proven that the bias was generated in the rejection tendency of the optical path by the difference of the core setting. |
| キーワード |
(和) |
エラスティック光ネットワーク / マルチコアファイバ / クロストーク / 変調方式 / 資源割当問題 / / / |
| (英) |
Elastic Optical Networks / Multi Core Fiber / Crosstalk / Modulation Level / RMSA / / / |
| 文献情報 |
信学技報, vol. 125, no. 372, PN2025-45, pp. 19-24, 2026年3月. |
| 資料番号 |
PN2025-45 |
| 発行日 |
2026-02-23 (PN) |
| ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
PN2025-45 |