|
|
| Chair |
|
Yuichi Nakamura (Toyohashi Univ. of Tech.) |
| Vice Chair |
|
Hideki Nakazawa (Hirosaki Univ.) |
| Secretary |
|
Tomoaki Terasako (Ehime Univ.), Mayumi Takeyama (Kitami Inst. of Tech) |
| Assistant |
|
Yasuo Kimura (Tokyo Univ. of Tech.), Fumihiko Hirose (Yamagata Univ.), Noriko Bamba (Shinshu Univ.) |
|
| Conference Date |
Wed, Oct 27, 2021 10:00 - 17:05 |
| Topics |
Functional materials (semiconductors, magnetic materials, dielectrics, transparent conductors / semiconductors, etc.) thin film processes / materials / devices, etc. |
| Conference Place |
|
Copyright
and
reproduction |
All rights are reserved and no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the publisher. Notwithstanding, instructors are permitted to photocopy isolated articles for noncommercial classroom use without fee. (License No.: 10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| Registration Fee |
This workshop will be held as the IEICE workshop in fully electronic publishing. Registration fee will be necessary except the speakers and participants other than the participants to workshop(s) in non-electronic publishing. See the registration fee page. We request the registration fee or presentation fee to participants who will attend the workshop(s) on CPM. |
Wed, Oct 27
10:00 - 17:05 |
| |
10:00-10:10 |
Opening Address ( 10 min. ) |
| (1) |
10:10-10:30 |
Fabrication of MgZnO and MgSnO films using sol-gel method  CPM2021-20 |
Yasuyuki Manabe, Satoshi Mizuno, Yasushi Takano (Shizuoka Univ.) |
| (2) |
10:30-10:50 |
Study on the low-temperature deposition method of SiNx film for Cu-TSV CPM2021-21 |
Masaru Sato, Mayumi B. Takeyama (Kitami Inst. of Tech.) |
| (3) |
10:50-11:10 |
Preparation of Cu2Sn1-xGexS3 utilizing two steps sulfurization CPM2021-22 |
Matsui Yuta, Myo Than Htay, Hashimoto Yoshio (Shinshu Univ.), Momose Noritake (NIT Nagano Coll) |
| |
11:10-11:20 |
Break ( 10 min. ) |
| (4) |
11:20-11:40 |
Histidine Decorated Nanoparticles of CdS Photocatalyst for Hydrogen Production via Water Splitting CPM2021-23 |
Yuya Ohno, Areef Billah, Shigeru Kubota, Fumihiko Hirose, Bashir Ahmmad Arima (Yamagata Univ.) |
| (5) |
11:40-12:00 |
Fabrication of optical-response spacer films for electrolyzed water battery CPM2021-24 |
Hiroki Endo, Myo Than Htay, Yoshio Hashimoto (Shinshu Univ) |
| (6) |
12:00-12:20 |
Effect on Aging Conditions of Beef CPM2021-25 |
Soichiro Umemura, Masaru Sato, Mayumi B. Takeyama (Kitami Inst. of Tech.) |
| |
12:20-13:20 |
Lunch Break ( 60 min. ) |
| (7) |
13:20-13:40 |
Effects of H2 and Ar dilution on the optical and electrical properties of Si and N doped diamond-like carbon films by plasma-enhanced chemical vapor deposition CPM2021-26 |
Yuya Sasaki, Hiroya Osanai, Yusuke Ohtani, Yuta Murono, Masayoshi Sato, Yasuyuki Kobayashi, Yoshiharu Enta, Yushi Suzuki, Hideki Nakazawa (Hirosaki Univ.) |
| (8) |
13:40-14:00 |
Structure and properties of CNT/cotton textiles composite CPM2021-27 |
Shuhei Oyama, Kazunori Fujisawa, Hiroyuki Muramatsu, Takuya Hayashi (Shinshu Univ.) |
| (9) |
14:00-14:20 |
Chemical vapor deposition of layered carbon nitride film CPM2021-28 |
Noriyuki Urakami, Kenshuke Takashima, Yoshio Hashimoto (Shinshu Univ.) |
| (10) |
14:20-14:40 |
Fabrication of carbon fiber using electrospinning method and its application to electric double layer capacitor CPM2021-29 |
Hirotakla Sakurai, Kazunori Fujisawa, Hiroyuki Muramatsu, Takuya Hayashi (Shinshu Univ) |
| |
14:40-14:50 |
Break ( 10 min. ) |
| (11) |
14:50-15:10 |
Improved Magnetic properties of La and Ta doped BiFeO3 CPM2021-30 |
Yuki Yoshikawa, Areef Billah, Shigeru Kubota, Fumihiko Hirose, Bashir Ahmmad Arima (Yamagata Univ.) |
| (12) |
15:10-15:30 |
Characterization of HfO2 film for Resistive Random Access Memory CPM2021-31 |
Yuki Kawai, Masaru Sato, Mayumi B Takeyama (Kitami Inst. of Tech.) |
| (13) |
15:30-15:50 |
Evaluation of memristors based on encapsulated ZnO CPM2021-32 |
Tomoki Kinoshita, Myo Than Htay, Yoshio Hashimoto (Shinshu Univ) |
| |
15:50-16:00 |
Break ( 10 min. ) |
| (14) |
16:00-16:20 |
Characteristics of K0.45Na0.55NbO3 ceramics fabricated from a mixed powder of K0.4Na0.6NbO3 and K0.5Na0.5NbO3 CPM2021-33 |
Tomoki Saikyo, Ryo Kobayashi, Noriko Bamba (Shinshu Univ.) |
| (15) |
16:20-16:40 |
Evaluation of Preservation Methods Japanese Sake Using Electrical Impedance Analysis. CPM2021-34 |
Tomoya Kajiwara, Masaru Sato, Mayumi B Takeyama (Kitami Inst. of Tech.) |
| (16) |
16:40-17:00 |
Electrical impedance measurement for wine tasting evaluation CPM2021-35 |
Mayumi B. Takeyama, Hiroto Takeuchi, Tomoya Kajiwara, Masaru Sato (Kitami Inst. & Technol.) |
| |
17:00-17:05 |
Closing Address ( 5 min. ) |
| Announcement for Speakers |
| General Talk | Each speech will have 15 minutes for presentation and 5 minutes for discussion. |
| Contact Address and Latest Schedule Information |
| CPM |
Technical Committee on Component Parts and Materials (CPM) [Latest Schedule]
|
| Contact Address |
|
Last modified: 2021-10-14 09:29:12
|